Car won't start
-
- Posts: 130
- Joined: Tue Nov 29, 2016 2:59 pm
- cars: bf xr6 turbo
vs ss
vr clubsport - Location: Rockhampton
Car won't start
Ok so I've fitted my nvram to my pcm and the car won't start, nor can I connect the flash tool or tunerpro. I've loaded the ose bin,xdf and adx files but still no joy. Fit the standard memcal and the car runs. I've tried changing g the echo settings. The led light comes on on the nvram when the ignition is on but it won't start or connect. Any help?
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Car won't start
Does the light stay lit for a couple of seconds after you turn the key back off
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 130
- Joined: Tue Nov 29, 2016 2:59 pm
- cars: bf xr6 turbo
vs ss
vr clubsport - Location: Rockhampton
Re: Car won't start
No, goes out instantly
- madmaxisback
- Posts: 145
- Joined: Mon Nov 09, 2009 4:56 pm
- cars: VN Calais
VK Berlina - Location: Perth
Re: Car won't start
Do the thermos come on when key is on?
Edit: AC fan
Edit: AC fan
Last edited by madmaxisback on Fri Oct 06, 2017 11:59 pm, edited 1 time in total.
-
- Posts: 130
- Joined: Tue Nov 29, 2016 2:59 pm
- cars: bf xr6 turbo
vs ss
vr clubsport - Location: Rockhampton
Re: Car won't start
It's a vr gst so no thermo and it not a connection issue with the cable as I just fitted the stock memcal started the car and could log using the appropriate adx.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Car won't start
Corrupted tune on nvram the light should stay lit when you key off if it doesn't no code is running on the ecu hence no connection
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Car won't start
Did you put a program on the nvram yourself if so which file
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 130
- Joined: Tue Nov 29, 2016 2:59 pm
- cars: bf xr6 turbo
vs ss
vr clubsport - Location: Rockhampton
Re: Car won't start
No, it came pre loaded from antus. How do I fix that mate?
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Car won't start
Do you have a memcal plugged in it or set on jumper mode.if it's corrupt or the wrong base file will need programmed with a chip programmer.there is another half of the nvram if you pull the jumper it will switch to the other program and may still function.i presume you added the write wire jumper on the back side of the pcm before fitting the nvram board
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 130
- Joined: Tue Nov 29, 2016 2:59 pm
- cars: bf xr6 turbo
vs ss
vr clubsport - Location: Rockhampton
Re: Car won't start
It's set on jumper mode and yep I've fitted the write wire to the back. I've also got a programmer at home. But I do t have the adapter to fit it I presume I'd need to remove the chip from the board to re write it? Will remove the jumper first and see what happens