$$ or beer in exchange of showing a noob the ropes

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
chipb
Posts: 13
Joined: Sun Sep 17, 2017 7:25 am
cars: vp ss, cammed, 5speed, supercharged
ve ssv series 2 wagon, 6speed, 280rwkw
HDJ79R Landcruiser 1HD-FTE
Location: Korumurra Vic

Re: $$ or beer in exchange of showing a noob the ropes

Post by chipb »

Ah cheers thanks a lot guys.
The wideband i will need a bit of know how to where i wire it into the ecu. Then by me doing that will it work straight off the bat or will some other changes need to take place for it to work?
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: $$ or beer in exchange of showing a noob the ropes

Post by antus »

The default settings are right for most widebands. If its out adjust the wideband 0 and 5 volt settings to match the specs for your hardware. The signal pin is documented with the other pins in the 12p download zip. You'll probably need to move the stub of an unused pin like ac request in the loom plug as the wideband pin isnt used in factory calobration and its not usually populated.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Post Reply