808 interface
-
- Posts: 130
- Joined: Tue Nov 29, 2016 2:59 pm
- cars: bf xr6 turbo
vs ss
vr clubsport - Location: Rockhampton
808 interface
Hi all.
So I was wondering if it was possible to adapt a ob1 port out of a vr/vs body harness directly into a 808 ecu and then utilize the Aldl interface to rt tune using a nvram?
Cheers.
So I was wondering if it was possible to adapt a ob1 port out of a vr/vs body harness directly into a 808 ecu and then utilize the Aldl interface to rt tune using a nvram?
Cheers.
Re: 808 interface
Yes if it's a VR VS manual ECU not an 808.
Re: 808 interface
If you already have an 808 get one of the USB comms board's. Great set up and well priced.
-
- Posts: 130
- Joined: Tue Nov 29, 2016 2:59 pm
- cars: bf xr6 turbo
vs ss
vr clubsport - Location: Rockhampton
Re: 808 interface
Dam, I've ordered the 808 interface board but unfortunately it hasn't tuned up in time for a job I have to get done today/tomorrow. Might have to go to the wreckers and see if they have a manual vr/vs ecu. It a retro for into an older car.
Also if I find a vr vs manual ecu can I still use the vn engine harness?
Also if I find a vr vs manual ecu can I still use the vn engine harness?
Last edited by nutbag355 on Fri Oct 27, 2017 10:49 am, edited 1 time in total.
Re: 808 interface
Where are you located?
-
- Posts: 130
- Joined: Tue Nov 29, 2016 2:59 pm
- cars: bf xr6 turbo
vs ss
vr clubsport - Location: Rockhampton
Re: 808 interface
Rockhampton mate.Dylan wrote:Where are you located?
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: 808 interface
Note you need VR/VS manual, thus its rare and generally more expensive. The auto computer is different.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- vlad01
- Posts: 7803
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: 808 interface
Or just an 808 and fit an SXR board like I did.antus wrote:Note you need VR/VS manual, thus its rare and generally more expensive. The auto computer is different.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: 808 interface
He probably has the comms board by now
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 130
- Joined: Tue Nov 29, 2016 2:59 pm
- cars: bf xr6 turbo
vs ss
vr clubsport - Location: Rockhampton
Re: 808 interface
Haha more than likely do antus, and I'll be putting it to good use. I borrowed a vr manual "305" ecm to get me out of trouble which worked well until the fuel pump gave me the middle finger and tapped out lol.
I was also lucky enough to acquire a "305" ecm yesterday in exchange for a favor so bonus there as well.
I was also lucky enough to acquire a "305" ecm yesterday in exchange for a favor so bonus there as well.