Hey guys just joined, ive currently got a vn ive turbocharged its a series 1
Im looking into the tuning side of it now and im looking at installing the nvram board, is there any posts or videos around that give a detailed instructions on the install? I understand there will be instructions with the nvram purchase but just wanted to have a look and see whats involved and how hard is it to actually install
Nvram install vn series 1
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Nvram install vn series 1
its only soldering 4 wires 5 solder joints in total and drilling holes to mount the comms board in the case its not hard full instructions come with the kit.nvram board is plug and play like a memcal
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: Nvram install vn series 1
O ok awsome yeah seemed to be simple just wanted to look into it before i got one,
anything else require modifying or adding for the ecu before i get it tuned
anything else require modifying or adding for the ecu before i get it tuned