VT 304 Injectors

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Post Reply
lowace
Posts: 59
Joined: Thu May 18, 2017 8:22 pm
cars: 1964 Eh holden and daily series 3 vs 5.0 ute

VT 304 Injectors

Post by lowace »

Hi all just after some info on injectors. I have the series 3 ute with nvram installed, I have changed the injectors over to a set of vn ones as I had them here and they were in better condition than the original ones.

Question is does anything have to be changed in the tune to run these or are they identical from vn through to vt, I was thinking they may be different due to the sequential but not sure.
Dylan
Posts: 3356
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: VT 304 Injectors

Post by Dylan »

Injector opening times, and PW add on times are quite different.

Not sure on what they're labelled in enhanced code.
lowace
Posts: 59
Joined: Thu May 18, 2017 8:22 pm
cars: 1964 Eh holden and daily series 3 vs 5.0 ute

Re: VT 304 Injectors

Post by lowace »

Ye ah ok so I have to change those opening times ect, does anyone know what the difference is and what I have to change.
I'm a little confused sorry would it be easier for me to just grab some more VT injectors.
Dylan
Posts: 3356
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: VT 304 Injectors

Post by Dylan »

Get the values from a tune that they come in like a VS tune or Can tune etc.
lowace
Posts: 59
Joined: Thu May 18, 2017 8:22 pm
cars: 1964 Eh holden and daily series 3 vs 5.0 ute

Re: VT 304 Injectors

Post by lowace »

No worries Dylan thanks for the help I'll give it a go. :thumbup:
Post Reply