Hi all just after some info on injectors. I have the series 3 ute with nvram installed, I have changed the injectors over to a set of vn ones as I had them here and they were in better condition than the original ones.
Question is does anything have to be changed in the tune to run these or are they identical from vn through to vt, I was thinking they may be different due to the sequential but not sure.
VT 304 Injectors
Re: VT 304 Injectors
Injector opening times, and PW add on times are quite different.
Not sure on what they're labelled in enhanced code.
Not sure on what they're labelled in enhanced code.
-
- Posts: 59
- Joined: Thu May 18, 2017 8:22 pm
- cars: 1964 Eh holden and daily series 3 vs 5.0 ute
Re: VT 304 Injectors
Ye ah ok so I have to change those opening times ect, does anyone know what the difference is and what I have to change.
I'm a little confused sorry would it be easier for me to just grab some more VT injectors.
I'm a little confused sorry would it be easier for me to just grab some more VT injectors.
Re: VT 304 Injectors
Get the values from a tune that they come in like a VS tune or Can tune etc.
-
- Posts: 59
- Joined: Thu May 18, 2017 8:22 pm
- cars: 1964 Eh holden and daily series 3 vs 5.0 ute
Re: VT 304 Injectors
No worries Dylan thanks for the help I'll give it a go.