Enhanced Mod Custom Tunes

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
User avatar
madmaxisback
Posts: 145
Joined: Mon Nov 09, 2009 4:56 pm
cars: VN Calais
VK Berlina
Location: Perth

Re: Enhanced Mod Custom Tunes

Post by madmaxisback »

Cheers mate

Gives me a good plan to suss for mine
Last edited by madmaxisback on Sat Apr 21, 2018 12:16 am, edited 1 time in total.
Wade
Posts: 562
Joined: Mon Jul 11, 2016 6:29 am
cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport

Re: Enhanced Mod Custom Tunes

Post by Wade »

Its my daily at the moment. But once ive got another daily, my plan is to see how far i can push it till it brakes
Wade
Posts: 562
Joined: Mon Jul 11, 2016 6:29 am
cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport

Re: Enhanced Mod Custom Tunes

Post by Wade »

I dont mind pulling an ecotec down and setting ring gaps or chucking in mls gaskets small stuff like that. But fir the most part im interested to see how far i can push them
seanlivingstone
Posts: 23
Joined: Fri Jan 20, 2017 1:19 am
cars: vy ss
vy calais super 6
vx commodore
vs manual v6

Re: Enhanced Mod Custom Tunes

Post by seanlivingstone »

dusto wrote:ill upload mine, its pretty well right on my car, timing is roughed in think im getting a lot of false knock as no matter what i set the timing to i get KR in the same places all the time,
valve train is a little rattley as is the blower drive

Engine Specs
Stock intake
Stock L67
Stock Blower
Stock TB
Stock Exhaust manifolds
Stock single cat exhaust

so completely stock ATM apart from

3.3 inch pulley
660cc deka injectors

runs really well considering the specs above

id love to see other members L67 tunes!

tune based on The1's Enhanced Bin v1.2
Dusto - L67 E85 660cc injectors.bin
Hey mate you running your e85 on standard lines and diff pump? Or what fuel setup you running thinking of doing it to mine. How much better over stock 98? Cheers
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Enhanced Mod Custom Tunes

Post by The1 »

Here's my car VS Auto Ecotec with intake, exhaust and Larger MAF Silver Badged Metal Delphi, Fomoco AL3E-F7A injectors, E85, 1.95 Rockers. Both tuned with Festy knock board and Wideband sensor.
VS_V6_$51_Enhanced_the1 - E85.bin
(128 KiB) Downloaded 536 times
Same as above but current tune on 98ron
VS_V6_$51_Enhanced_the1 - PULP.bin
(128 KiB) Downloaded 553 times
using 1.4d VS V6 xdf
Wade
Posts: 562
Joined: Mon Jul 11, 2016 6:29 am
cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport

Re: Enhanced Mod Custom Tunes

Post by Wade »

this is what im running in the misses daily
Attachments
Hot Tune VY_V6_$060A_Enhanced_v0.9.bin
(128 KiB) Downloaded 666 times
User avatar
madmaxisback
Posts: 145
Joined: Mon Nov 09, 2009 4:56 pm
cars: VN Calais
VK Berlina
Location: Perth

Re: Enhanced Mod Custom Tunes

Post by madmaxisback »

Wade wrote:this is what im running in the misses daily
Had a look at this one mate. Was gonna try in mine

What's done to this car? Stock - no mods?

Is it just PULP98 only tune up with no EGR and mild Auto mods?

Cheers
Wade
Posts: 562
Joined: Mon Jul 11, 2016 6:29 am
cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport

Re: Enhanced Mod Custom Tunes

Post by Wade »

Pretty much stock. Apart from an l67 exhaust with twin hi flow cats
Wade
Posts: 562
Joined: Mon Jul 11, 2016 6:29 am
cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport

Re: Enhanced Mod Custom Tunes

Post by Wade »

Cant remembar all changes made. Think idle timing was changed for smoother idke. 2-4 pressure increase for trans shifts. And changed wot afr. Honestly can remember much else
Wade
Posts: 562
Joined: Mon Jul 11, 2016 6:29 am
cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport

Re: Enhanced Mod Custom Tunes

Post by Wade »

The1 wrote:Here's my car VS Auto Ecotec with intake, exhaust and Larger MAF Silver Badged Metal Delphi, Fomoco AL3E-F7A injectors, E85, 1.95 Rockers. Both tuned with Festy knock board and Wideband sensor.
VS_V6_$51_Enhanced_the1 - E85.bin
Same as above but current tune on 98ron
VS_V6_$51_Enhanced_the1 - PULP.bin
using 1.4d VS V6 xdf
The1 have you got a formula or calculation for working out injector flow rate for e85? I set kinjflow up with fuel weight for e85 and it spits out an even lower number.
Post Reply