Enhanced Mod Custom Tunes

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
User avatar
Posts: 147
Joined: Mon Nov 09, 2009 4:56 pm
Location: Perth

Re: Enhanced Mod Custom Tunes

Postby madmaxisback » Fri Apr 20, 2018 11:50 pm

Cheers mate

Gives me a good plan to suss for mine
Last edited by madmaxisback on Sat Apr 21, 2018 12:16 am, edited 1 time in total.

Posts: 510
Joined: Mon Jul 11, 2016 6:29 am

Re: Enhanced Mod Custom Tunes

Postby Wade » Sat Apr 21, 2018 12:00 am

Its my daily at the moment. But once ive got another daily, my plan is to see how far i can push it till it brakes

Posts: 510
Joined: Mon Jul 11, 2016 6:29 am

Re: Enhanced Mod Custom Tunes

Postby Wade » Sat Apr 21, 2018 12:02 am

I dont mind pulling an ecotec down and setting ring gaps or chucking in mls gaskets small stuff like that. But fir the most part im interested to see how far i can push them

Posts: 22
Joined: Fri Jan 20, 2017 1:19 am

Re: Enhanced Mod Custom Tunes

Postby seanlivingstone » Sat Apr 21, 2018 1:35 am

dusto wrote:ill upload mine, its pretty well right on my car, timing is roughed in think im getting a lot of false knock as no matter what i set the timing to i get KR in the same places all the time,
valve train is a little rattley as is the blower drive

Engine Specs
Stock intake
Stock L67
Stock Blower
Stock TB
Stock Exhaust manifolds
Stock single cat exhaust

so completely stock ATM apart from

3.3 inch pulley
660cc deka injectors

runs really well considering the specs above

id love to see other members L67 tunes!

tune based on The1's Enhanced Bin v1.2
Dusto - L67 E85 660cc injectors.bin


Hey mate you running your e85 on standard lines and diff pump? Or what fuel setup you running thinking of doing it to mine. How much better over stock 98? Cheers

User avatar
Posts: 4087
Joined: Mon Jan 04, 2010 10:23 am

Re: Enhanced Mod Custom Tunes

Postby The1 » Sat Apr 21, 2018 7:45 pm

Here's my car VS Auto Ecotec with intake, exhaust and Larger MAF Silver Badged Metal Delphi, Fomoco AL3E-F7A injectors, E85, 1.95 Rockers. Both tuned with Festy knock board and Wideband sensor.

VS_V6_$51_Enhanced_the1 - E85.bin
(128 KiB) Downloaded 61 times


Same as above but current tune on 98ron
VS_V6_$51_Enhanced_the1 - PULP.bin
(128 KiB) Downloaded 68 times


using 1.4d VS V6 xdf

Posts: 510
Joined: Mon Jul 11, 2016 6:29 am

Re: Enhanced Mod Custom Tunes

Postby Wade » Sat Apr 21, 2018 10:56 pm

this is what im running in the misses daily
Attachments
Hot Tune VY_V6_$060A_Enhanced_v0.9.bin
(128 KiB) Downloaded 76 times

User avatar
Posts: 147
Joined: Mon Nov 09, 2009 4:56 pm
Location: Perth

Re: Enhanced Mod Custom Tunes

Postby madmaxisback » Sun Apr 22, 2018 4:38 pm

Wade wrote:this is what im running in the misses daily


Had a look at this one mate. Was gonna try in mine

What's done to this car? Stock - no mods?

Is it just PULP98 only tune up with no EGR and mild Auto mods?

Cheers

Posts: 510
Joined: Mon Jul 11, 2016 6:29 am

Re: Enhanced Mod Custom Tunes

Postby Wade » Sun Apr 22, 2018 7:46 pm

Pretty much stock. Apart from an l67 exhaust with twin hi flow cats

Posts: 510
Joined: Mon Jul 11, 2016 6:29 am

Re: Enhanced Mod Custom Tunes

Postby Wade » Sun Apr 22, 2018 7:49 pm

Cant remembar all changes made. Think idle timing was changed for smoother idke. 2-4 pressure increase for trans shifts. And changed wot afr. Honestly can remember much else

Posts: 510
Joined: Mon Jul 11, 2016 6:29 am

Re: Enhanced Mod Custom Tunes

Postby Wade » Sun Apr 22, 2018 7:53 pm

The1 wrote:Here's my car VS Auto Ecotec with intake, exhaust and Larger MAF Silver Badged Metal Delphi, Fomoco AL3E-F7A injectors, E85, 1.95 Rockers. Both tuned with Festy knock board and Wideband sensor.

VS_V6_$51_Enhanced_the1 - E85.bin


Same as above but current tune on 98ron
VS_V6_$51_Enhanced_the1 - PULP.bin


using 1.4d VS V6 xdf
The1 have you got a formula or calculation for working out injector flow rate for e85? I set kinjflow up with fuel weight for e85 and it spits out an even lower number.

PreviousNext

Return to Holden ALDL ECUs

Who is online

Users browsing this forum: Google [Bot] and 4 guests