2003 LS1 Manual BIn file

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
mattyc
Posts: 54
Joined: Fri May 21, 2010 8:26 pm

Re: 2003 LS1 Manual BIn file

Post by mattyc »

VX L67 Getrag wrote: I don't suppose you have a good base of the E38 files too?
I was chasing a late 2008 early 2009 12624402 LS3 6.2L Manual HSV file, there is a few both EFI-live & HPT claim to be 6.2L 12624402 manual files but when you look at angine displacement it shows as 0.75 not 0.775 which then throws out ALL the fuel/spark equations!
Do you have a LS2 manual 2008.5 12624402 sedan file? i have LS3 files here.
VX L67 Getrag
Posts: 2877
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: 2003 LS1 Manual BIn file

Post by VX L67 Getrag »

I have a couple but I'm not sure where the cut off is from 2008.5 to 2009 as it looks like ute came out earlier & more common.

From what I found all of the LS3 file were labelled wrong & were actually 6.0L instead of proper LS3 6.2L & can only tell when you open them up & check certain areas!

PM for more info needed!
Post Reply