Hi All
I have just received my new NVRAM from Antus and installed it in my 424 computer which is fitted to my vs ss, I have managed to successfully hook up to the car but every time I try to make a change in Tunerpro when emulating it faults with upload failed.
Now I think I have the correct XDF,ADX an Bin for what I'm trying to achieve, I found this in the 11p zip which included everything which I thought I needed.
I have read about the OSE flash tool as well, do I need to use this in conjunction with TP?
Any help with this would be great please, I have used TP5 in the past to tune my series 3 vs and didn't have this issue.
Look forward to the replies and thanks in advance.
Cheers Stu
11P tuning, making changes (Issues)
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: 11P tuning, making changes (Issues)
Check the jumper wire is installed in the PCM correctly and the RW jumper on the NVRAM board is linking the pins.
-
- Posts: 59
- Joined: Thu May 18, 2017 8:22 pm
- cars: 1964 Eh holden and daily series 3 vs 5.0 ute
Re: 11P tuning, making changes (Issues)
Thanks for the quick reply VL.
I double checked the jumper and wire which I installed and it all seemed fine, I did however have another 424 comp in the shed which I have just setup and installed and it seems to be fine, not sure what was wrong before maybe a solder joint or something silly.
Anyways appreciate the time taken to reply.
My next step is where to start with the tuning, Its a stock stroke 304 with 10.5.1 comp, mildish cam, edelbrock manifold and 1375cfm 4 barrel throttle body, also has ported heads ect.
It idles sort of ok but I just don't know what to adjust first and where to look for it in the tables.
Thanks in adavnce
I double checked the jumper and wire which I installed and it all seemed fine, I did however have another 424 comp in the shed which I have just setup and installed and it seems to be fine, not sure what was wrong before maybe a solder joint or something silly.
Anyways appreciate the time taken to reply.
My next step is where to start with the tuning, Its a stock stroke 304 with 10.5.1 comp, mildish cam, edelbrock manifold and 1375cfm 4 barrel throttle body, also has ported heads ect.
It idles sort of ok but I just don't know what to adjust first and where to look for it in the tables.
Thanks in adavnce
Re: 11P tuning, making changes (Issues)
Check out the tuning guides in the FAQ (little green button) link
According to chemistry, alcohol is a solution...