(LS1) xdf for vy osi 5074 needed
(LS1) xdf for vy osi 5074 needed
hey guys i cant work.out.for the.life of me how to work out map references in winols ect i cant.see.them if.someone can point me.in the right direction or.are.kind enough to share a full option xdf for.personal use it would.be much appreciated and also antus and sv5000 you guys are.legends
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: (LS1) xdf for vy osi 5074 needed
Dont use winols for this. winols is better for bosch computers where it can identify table header data and located tables and size the axis themselves. winols cant do that for a delphi OS as there is no standard header on the tables.
I have created a partial XDF which is available here: viewtopic.php?f=3&t=3845&p=85328
There is no complete public XDF until someone invests the time to make it and has the generosity to make it available to the public.
If you need a couple more tables or identifiers ask in the above thread and I'll add them. But I dont have the time to do the whole thing. So far nobody has requested anything so I figured it has no value.
I have created a partial XDF which is available here: viewtopic.php?f=3&t=3845&p=85328
There is no complete public XDF until someone invests the time to make it and has the generosity to make it available to the public.
If you need a couple more tables or identifiers ask in the above thread and I'll add them. But I dont have the time to do the whole thing. So far nobody has requested anything so I figured it has no value.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: (LS1) xdf for vy osi 5074 needed
Cheers mate if i can just get a handle on it ill invest the time
Re: (LS1) xdf for vy osi 5074 needed
ill post.a few moded bins up for cammed ls1 when i get.home