Engine light/fault codes, comms with 3rd party interface
-
- Posts: 105
- Joined: Fri Jul 22, 2016 5:54 pm
- cars: Vs V8 series 3 commodore ute
- Location: Sunshine Coast
Re: Egine light on and fault codes after NVRAM install
Thanks Vlad01,
Doesn't the right vehicle selection from the drop down menu the first step
Doesn't the right vehicle selection from the drop down menu the first step
-
- Posts: 562
- Joined: Mon Jul 11, 2016 6:29 am
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Re: Egine light on and fault codes after NVRAM install
Yep go into device manager and scroll down to comms ports. Confirm what comms port your aldl is configured too. Than go into flash tool. Options. Preferences. Vehicle (vs v8 in vehicle). Interface (USB aldl). Ecm com port ( what ever comms port your aldl is configured too). Tick auto echo detect and than ok. Than you’ll be back at the main screen again and click connect to Ecm. It should do its thing and once finished down the bottom you should see it come up. Than click get bin and save to your files once done
-
- Posts: 105
- Joined: Fri Jul 22, 2016 5:54 pm
- cars: Vs V8 series 3 commodore ute
- Location: Sunshine Coast
Re: Egine light on and fault codes after NVRAM install
Thanks WADE,
I have done exactly what you have described and it says that my comms port 3 (which is the correct port i have my ADSL plugged into) is 'already closed'?
I have done exactly what you have described and it says that my comms port 3 (which is the correct port i have my ADSL plugged into) is 'already closed'?
-
- Posts: 105
- Joined: Fri Jul 22, 2016 5:54 pm
- cars: Vs V8 series 3 commodore ute
- Location: Sunshine Coast
Re: Egine light on and fault codes after NVRAM install
sorry that was meant to be aldl
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Egine light on and fault codes after NVRAM install
That means some other software is using it. You must have something else running (ose flash tool connected and open?) or some other software on your pc is interfering.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- vlad01
- Posts: 7795
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Egine light on and fault codes after NVRAM install
Check in the device manager and see if the com3 has an exclamation warning. I have had a number of PC lately at work with win10 blocking devices due to driver signature breaking on some devices from a win update several or more weeks ago.
Its weird as it let the drivers install with no warnings but shows up with exclamation in the device managers and doesn't allow you to use the device. Could be possibly this issue?
Its weird as it let the drivers install with no warnings but shows up with exclamation in the device managers and doesn't allow you to use the device. Could be possibly this issue?
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- vlad01
- Posts: 7795
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Egine light on and fault codes after NVRAM install
Never mind, wrong thread. I just realized there is 2 posting people with similar issues
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
-
- Posts: 105
- Joined: Fri Jul 22, 2016 5:54 pm
- cars: Vs V8 series 3 commodore ute
- Location: Sunshine Coast
Re: Egine light on and fault codes after NVRAM install
I can't find anything open, is there so way to check I'm running windows 10
-
- Posts: 105
- Joined: Fri Jul 22, 2016 5:54 pm
- cars: Vs V8 series 3 commodore ute
- Location: Sunshine Coast
Re: Egine light on and fault codes after NVRAM install
some ways to check
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Egine light on and fault codes after NVRAM install
What type of hardware are you running?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396