304 out of vr into vn

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Aussieboi
Posts: 5
Joined: Fri Mar 23, 2018 2:41 pm
cars: Vn executive and vn Calais

304 out of vr into vn

Post by Aussieboi »

I’ve got a vn with a 304 out of a vr and I’m using the vr loom and computer and the vn doesn’t start due to vats I’m guessing and would like to know what I’d need to delete vats off the computer thanks
Last edited by Aussieboi on Sun Mar 25, 2018 2:12 pm, edited 1 time in total.
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: 304 out of vs into vn

Post by Dylan »

Fit the VN wiring and compute, or is it a VR auto trans?
Aussieboi
Posts: 5
Joined: Fri Mar 23, 2018 2:41 pm
cars: Vn executive and vn Calais

Re: 304 out of vs into vn

Post by Aussieboi »

It’s a vr auto and I don’t have a vn v8 loom and computer for it
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: 304 out of vs into vn

Post by delcowizzid »

Just need a memcal without vats active
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Aussieboi
Posts: 5
Joined: Fri Mar 23, 2018 2:41 pm
cars: Vn executive and vn Calais

Re: 304 out of vs into vn

Post by Aussieboi »

What’s involved in disabling vats and what would I need to do it and Cheers fallas for the help
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: 304 out of vs into vn

Post by delcowizzid »

Need a chip burner an eprom eraser and an adaptor to fit the memcal in the programmer or one of us can probably do it for you where you located
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: 304 out of vs into vn

Post by Dylan »

VR wiring won't fit a VN. You've made this pretty hard on yourself.
Have another trans you can use?
Aussieboi
Posts: 5
Joined: Fri Mar 23, 2018 2:41 pm
cars: Vn executive and vn Calais

Re: 304 out of vs into vn

Post by Aussieboi »

I didn’t put the vr loom and box in the car was in it when I brought it and I found a vs memcal with vats removed on eBay would that still work being vs and I’m in sale Victoria mate
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: 304 out of vs into vn

Post by Dylan »

The memcal is the easy part providing the wiring has been sorted as a VR loom is far from plug and play into a VN. If you want a VATS off memcal PM me that's easy fixed and may get you going.
gtrboyy
Posts: 159
Joined: Mon May 22, 2017 1:55 am
cars: vp 'moo mang' ute
torana
bombadores
Location: Sydney

Re: 304 out of vs into vn

Post by gtrboyy »

Doing something similar to this with vp ute in month or so.

vats disabled
festy speedo corrector (speedo signal supposedly different vs to vp)

Engine harness plug needs to be modified & shortened...looks like on vs it goes across firewall to driver's side(?) where as vn/p have it near ecu up under dash & probably needs new plug or repinning.
Post Reply