304 out of vr into vn
304 out of vr into vn
I’ve got a vn with a 304 out of a vr and I’m using the vr loom and computer and the vn doesn’t start due to vats I’m guessing and would like to know what I’d need to delete vats off the computer thanks
Last edited by Aussieboi on Sun Mar 25, 2018 2:12 pm, edited 1 time in total.
Re: 304 out of vs into vn
Fit the VN wiring and compute, or is it a VR auto trans?
Re: 304 out of vs into vn
It’s a vr auto and I don’t have a vn v8 loom and computer for it
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: 304 out of vs into vn
Just need a memcal without vats active
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: 304 out of vs into vn
What’s involved in disabling vats and what would I need to do it and Cheers fallas for the help
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: 304 out of vs into vn
Need a chip burner an eprom eraser and an adaptor to fit the memcal in the programmer or one of us can probably do it for you where you located
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: 304 out of vs into vn
VR wiring won't fit a VN. You've made this pretty hard on yourself.
Have another trans you can use?
Have another trans you can use?
Re: 304 out of vs into vn
I didn’t put the vr loom and box in the car was in it when I brought it and I found a vs memcal with vats removed on eBay would that still work being vs and I’m in sale Victoria mate
Re: 304 out of vs into vn
The memcal is the easy part providing the wiring has been sorted as a VR loom is far from plug and play into a VN. If you want a VATS off memcal PM me that's easy fixed and may get you going.
-
- Posts: 159
- Joined: Mon May 22, 2017 1:55 am
- cars: vp 'moo mang' ute
torana
bombadores - Location: Sydney
Re: 304 out of vs into vn
Doing something similar to this with vp ute in month or so.
vats disabled
festy speedo corrector (speedo signal supposedly different vs to vp)
Engine harness plug needs to be modified & shortened...looks like on vs it goes across firewall to driver's side(?) where as vn/p have it near ecu up under dash & probably needs new plug or repinning.
vats disabled
festy speedo corrector (speedo signal supposedly different vs to vp)
Engine harness plug needs to be modified & shortened...looks like on vs it goes across firewall to driver's side(?) where as vn/p have it near ecu up under dash & probably needs new plug or repinning.