FLASHTOOL V151 CONSTANT ERROR

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Post Reply
Cameron279
Posts: 5
Joined: Sun Apr 29, 2018 3:34 pm

FLASHTOOL V151 CONSTANT ERROR

Post by Cameron279 »

Hey guys, new to this whole tuning buisness and having trouble getting flashtool to "get bin" from pcm. Car is a VX V6 L36 with flash PCM. PCM will connect like it should and also reads in TunerPro just fine. This is what its saying, sometimes it will get further than others but not by much. Also tried "write bin" on a spare VY ecu as i want to load a superchraged bin file onto it and it also errored and now that pcm is unusable. Any help PLEASE!!!

4:28:20 PM FlashTool Version 0.1.5.1 Program Loading...
4:28:21 PM Program Ready
4:29:27 PM User Options Loaded From System
4:29:30 PM Prest Options Loaded: Flash PCM in Vehicle
4:29:33 PM User Options Saved To System
4:29:37 PM Found VX Flash PCM, BCC: DMTY
4:29:37 PM VIN Of Connected Vehicle: 6H8VXK35A2L845689
4:29:37 PM COM4 closed
4:29:45 PM Starting Get Bin From ECM...
4:29:45 PM COM4 Open
4:29:45 PM Waiting For HeartBeat...
4:29:45 PM Found A HeartBeat Frame, Timer Started
4:29:46 PM Found Another HeartBeat Frame After 303mS
4:29:46 PM Waiting For 15ms Of Silence With 300ms Timeout
4:29:46 PM Silence Detected
4:29:46 PM Requesting Chatter To Be Disabled For Device F1
4:29:46 PM Chatter Disabled
4:29:46 PM Waiting For 15ms Of Silence With 300ms Timeout
4:29:46 PM Silence Detected
4:29:46 PM Requesting Chatter To Be Disabled For Device F7
4:29:46 PM Chatter Disabled
4:29:46 PM Requesting Security Seed
4:29:46 PM Security Has Already Been Passed, PCM Unlocked
4:29:46 PM Requesting Mode 5/6 Access
4:29:46 PM Mode 5/6 Access Allowed
4:29:47 PM Requesting The Type Of Flash Memory In Use
4:29:47 PM No Response
4:29:47 PM No Response
4:29:48 PM Found AMD 29F010 Flash Memory
4:29:48 PM Sector Protection: Sector 0=0, Sector 1=0, Sector 2=0, Sector 3=0, Sector 4=0, Sector 5=0, Sector 6=0, Sector 7=0
4:29:48 PM Starting Bin Dumper...
4:29:48 PM Using Uploaded Bin Dumper Routines
4:29:48 PM Requesting 64 Bytes From Address $0
4:29:48 PM No Response, Re-Sending The Request
4:29:48 PM Requesting 64 Bytes From Address $0
4:29:48 PM No Response, Re-Sending The Request
4:29:48 PM Requesting 64 Bytes From Address $0
4:29:48 PM Got 64 Bytes Of Data
4:29:48 PM Requesting 64 Bytes From Address $40
4:29:49 PM No Response, Re-Sending The Request
4:29:49 PM Requesting 64 Bytes From Address $40
4:29:49 PM No Response, Re-Sending The Request
4:29:49 PM Requesting 64 Bytes From Address $40
4:29:49 PM No Response, Re-Sending The Request
4:29:49 PM Requesting 64 Bytes From Address $40
4:29:50 PM No Response, Re-Sending The Request
4:29:50 PM Requesting 64 Bytes From Address $40
4:29:50 PM No Response, Re-Sending The Request
4:29:50 PM Requesting 64 Bytes From Address $40
4:29:50 PM No Response, Re-Sending The Request
4:29:50 PM Requesting 64 Bytes From Address $40
4:29:51 PM No Response, Re-Sending The Request
4:29:51 PM Requesting 64 Bytes From Address $40
4:29:51 PM No Response, Re-Sending The Request
4:29:51 PM Requesting 64 Bytes From Address $40
4:29:51 PM No Response, Re-Sending The Request
4:29:51 PM Too Many ReSends, Aborted Task
4:29:51 PM COM4 closed
4:29:51 PM Clean Up The PCM
4:29:52 PM PCM Resetting...
4:29:52 PM Waiting For 15ms Of Silence With 300ms Timeout
4:29:52 PM Silence Detected
4:29:52 PM Requesting Chatter To Be Enabled For Device F7
4:29:52 PM Chatter Enabled
4:29:52 PM Waiting For 15ms Of Silence With 300ms Timeout
4:29:52 PM Silence Detected
4:29:52 PM Requesting Chatter To Be Enabled For Device F1
4:29:53 PM Chatter Enabled
4:29:56 PM Binary Read Fail
4:29:56 PM COM4 Closed
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: FLASHTOOL V151 CONSTANT ERROR

Post by delcowizzid »

Is it a pcmhacking.net cable or some other brand these later cars have very precise data bus timing and only a quality cable will work.plus there is no vx flash ecu tune for supercharged and can't flash the vx l67 tune into it that tune is for a memcal based ecu for vx l67
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Cameron279
Posts: 5
Joined: Sun Apr 29, 2018 3:34 pm

Re: FLASHTOOL V151 CONSTANT ERROR

Post by Cameron279 »

The cable is from EnvyousCustoms, don't think it was a cheap one and I found a link on here that read as though the tune was able to be loaded on flash based PCMs in the case of low boost turbo or N/A + s/charger applications
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: FLASHTOOL V151 CONSTANT ERROR

Post by delcowizzid »

The vy enhanced code by the1 can be tuned for boost and flashed in
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Cameron279
Posts: 5
Joined: Sun Apr 29, 2018 3:34 pm

Re: FLASHTOOL V151 CONSTANT ERROR

Post by Cameron279 »

Yeah that's the one I tried using but still ended up crashing
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: FLASHTOOL V151 CONSTANT ERROR

Post by delcowizzid »

If you can't read properly it will just brick any eco you try to write
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Cameron279
Posts: 5
Joined: Sun Apr 29, 2018 3:34 pm

Re: FLASHTOOL V151 CONSTANT ERROR

Post by Cameron279 »

Any solutions you can think of? Seems no one else has issues but I don't think I'm doing anything wrong, I've been following the steps on multiple forums. Is there maybe a different/older version of the software I could try and see if it works?
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: FLASHTOOL V151 CONSTANT ERROR

Post by antus »

It looks like the first data frame made it eventually so the dumper appears to be loaded and running. I'd suspect a problem with noise on the vehicle data bus, possibly from something like a wideband heater circuit or poor quality connections. If not that a prob with the cable itself.

Code: Select all

4:29:48 PM Requesting 64 Bytes From Address $0
4:29:48 PM No Response, Re-Sending The Request
4:29:48 PM Requesting 64 Bytes From Address $0
4:29:48 PM No Response, Re-Sending The Request
4:29:48 PM Requesting 64 Bytes From Address $0
4:29:48 PM Got 64 Bytes Of Data
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Cameron279
Posts: 5
Joined: Sun Apr 29, 2018 3:34 pm

Re: FLASHTOOL V151 CONSTANT ERROR

Post by Cameron279 »

Yeah ok that's interesting, I'll check for codes on the actual scan tool at work and see if anything like that has been stored.
Post Reply