Alright so my vs race car runs an ecotec but I have to run it on a vn loom an computer with a atfy memcal now I’m planning on building a new motor, heads are to remain stock and can only be faced and have valve springs upgraded, we can take 13 deg out of the tone wheel behind the balancer
I’m wondering what else can be done to the wiring looms to make this get the most power eg thermostat resistor,
Ecotec running on Vn wiring loom
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Ecotec running on Vn wiring loom
This has come up before, have a look at this thread:
viewtopic.php?f=7&t=4493
there is another link in that thread, one of Holden202T's projects which i'll duplicate here too. Has some nice graphs thanks to Jayme viewtopic.php?f=16&t=144
viewtopic.php?f=7&t=4493
there is another link in that thread, one of Holden202T's projects which i'll duplicate here too. Has some nice graphs thanks to Jayme viewtopic.php?f=16&t=144
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 2
- Joined: Sat Sep 10, 2016 6:46 pm
- cars: Px ford ranger
Wb Holden one Tonner ( project)
Vs street stock (building)
Re: Ecotec running on Vn wiring loom
Awsome thankyou mate