Burning Eproms wont work if there is a change to the binary
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Burning Eproms wont work if there is a change to the bin
Yep select 128 chip size 32 bin size and 32 block size will spot out 4 files .off the top of my head i think split 0 is jumper on tune and split 2 is jumper off and yes you MUST remove the nvram can't read it with a memcal header
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: Burning Eproms wont work if there is a change to the bin
Indeed, so it sits in the programmer like this.
-
- Posts: 130
- Joined: Tue Nov 29, 2016 2:59 pm
- cars: bf xr6 turbo
vs ss
vr clubsport - Location: Rockhampton
Re: Burning Eproms wont work if there is a change to the bin
Cheers for the info mate. Will know for next time now. I now understand why all the others I’ve done worked fine and this one gave me issues. Operator errordelcowizzid wrote:Yep select 128 chip size 32 bin size and 32 block size will spot out 4 files .off the top of my head i think split 0 is jumper on tune and split 2 is jumper off and yes you MUST remove the nvram can't read it with a memcal header