Burning Eproms wont work if there is a change to the binary

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Post Reply
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:
Contact delcowizzid

Re: Burning Eproms wont work if there is a change to the bin

Post by delcowizzid »

Yep select 128 chip size 32 bin size and 32 block size will spot out 4 files .off the top of my head i think split 0 is jumper on tune and split 2 is jumper off and yes you MUST remove the nvram can't read it with a memcal header
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Top
Ken
Posts: 206
Joined: Tue Dec 17, 2013 1:05 am

Re: Burning Eproms wont work if there is a change to the bin

Post by Ken »

Indeed, so it sits in the programmer like this.
NvRam.jpg
NvRam.jpg (49.51 KiB) Viewed 1694 times
Top
nutbag355
Posts: 130
Joined: Tue Nov 29, 2016 2:59 pm
cars: bf xr6 turbo
vs ss
vr clubsport
Location: Rockhampton

Re: Burning Eproms wont work if there is a change to the bin

Post by nutbag355 »

delcowizzid wrote:Yep select 128 chip size 32 bin size and 32 block size will spot out 4 files .off the top of my head i think split 0 is jumper on tune and split 2 is jumper off and yes you MUST remove the nvram can't read it with a memcal header
Cheers for the info mate. Will know for next time now. I now understand why all the others I’ve done worked fine and this one gave me issues. Operator error :wall:
Top
Post Reply

Return to “Holden ALDL ECUs”