Vx l67 flash

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Acetek
Posts: 11
Joined: Wed Jul 11, 2018 5:50 pm
cars: S13 convertible
Vu charged 6
S13 track car

Re: Vx l67 flash

Post by Acetek »

doing research it appears all l67 pcm were memcal? am i right in saying that?
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Vx l67 flash

Post by delcowizzid »

Yes vt vx vy l67 all the same ecu with a different memcal for each model.
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Acetek
Posts: 11
Joined: Wed Jul 11, 2018 5:50 pm
cars: S13 convertible
Vu charged 6
S13 track car

Re: Vx l67 flash

Post by Acetek »

now it makes more sense to me

so as you said ill need someone elses vx flash tune or tune mine
L67PSI
Posts: 177
Joined: Mon Dec 12, 2016 11:27 am
cars: L67 VT Calais

Re: Vx l67 flash

Post by L67PSI »

Just a note on fuel pump. With a top swap the stock ecotec fuel pump needs to be upgraded, it can't flow enough LPH. Many would swap to a Walbro 255 LPH pump.
Acetek
Posts: 11
Joined: Wed Jul 11, 2018 5:50 pm
cars: S13 convertible
Vu charged 6
S13 track car

Re: Vx l67 flash

Post by Acetek »

its gone a walbro 450 in it
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Vx l67 flash

Post by antus »

Yes the vx l67 tune runs on the previous generation vt computer, and isnt plug n play. You'll have to change wiring to swap computers to run it. Or you can use the flas pcm and tune yourself with the enhanced bin which the1 wrote which adds support for boost to the factory flash pcm which otherwise never came out with boost support. I dont think that tune comes ready to drive either, but im not sure. There are a couple of threads on the site going through these options. I'll paste a link later when im on a pc.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
VX L67 Getrag
Posts: 2877
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: Vx l67 flash

Post by VX L67 Getrag »

If you send me the ecu's you've bricked & a good 1 just in case I should be able to get them to respond again & if you want 1 as a start base top swap tune flashed on it let me know(PM).
Acetek
Posts: 11
Joined: Wed Jul 11, 2018 5:50 pm
cars: S13 convertible
Vu charged 6
S13 track car

Re: Vx l67 flash

Post by Acetek »

When using the1 enhanced flash do i flash it on as write bin or write cal?

Ive got a mate thats learning how to use tunerpro so should be all see with tuning side of it

Just need to know how to flash the1 bin file onto my ecu
VX L67 Getrag
Posts: 2877
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: Vx l67 flash

Post by VX L67 Getrag »

With the Flash PCM's It's a lot of time as you can't do things realtime, so your only using tunerpro to make mods to bin & then the ose tool to flash each time!

So long as The1's enhanced is the same calibration as yours you just flash cal, but if it's a different calibration then you can't use it at all as the rest of the file is zero'd out!

I didn't mention in post above but reason for sending your bricked ecu's is I may be able to make them usable again!
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: Vx l67 flash

Post by VL400 »

If you flick me a PM Acetek I can send you a beta version of the flashtool that will recover the dead PCMs.

To go to the flash PCM enhanced code working you need to do a write bin initially (answer no to writing the registers), then after that to make your tuning changes just write cal.
Post Reply