Vx l67 flash
Vx l67 flash
Hey guys having a bit of drama an already killed 2 ecus.....
Ive done a l67 top end swap and im trying to flash a l67 tune onto my l36 ecu
Both are vx bin files
Whats the best way to do this?
Im using flash tool and clicking write bin
Ive done a l67 top end swap and im trying to flash a l67 tune onto my l36 ecu
Both are vx bin files
Whats the best way to do this?
Im using flash tool and clicking write bin
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Vx l67 flash
You can't flash an l67 tune into flash ecus they are for memcal based ecus.you need to suck out and tune the original bin from the ecu or swap to the vx enhanced flash ecu code by the1 to suit vx
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: Vx l67 flash
i tried flashing using VX_V6_SC_$A5K_Enhanced_v1.3f.zip
not sure if thats right
am i able to copy the l67 info onto my ecu?
not sure if thats right
am i able to copy the l67 info onto my ecu?
Re: Vx l67 flash
unless im doing the process wrong?
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Vx l67 flash
That's for l67 memcal based ecus.it will just brick your pcm
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: Vx l67 flash
yeh it did haha how can i swap then?
or is my best option to tune mine
or is my best option to tune mine
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Vx l67 flash
download/file.php?id=13708 is vx flash ecu .you will need to either just start tuning from scratch or copy some stuff from the l67 tune over to the vx flash based code or see if there's any user submitted tunes for vx flash ecu in the custom tune thread
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: Vx l67 flash
so what i just download needs to be tuned them written onto my ecu?
also if i find a submitted tune will that be ok to flash or is that to copy some stuff off?
thanks for the help just want to try get it running right
also if i find a submitted tune will that be ok to flash or is that to copy some stuff off?
thanks for the help just want to try get it running right
Re: Vx l67 flash
If you want the L67 tune to run you need to change PCM to memcal based. These have service number ending 396.
Ideally a top swap requires a re-tune, but this should be a good starting point.
Ideally a top swap requires a re-tune, but this should be a good starting point.
Re: Vx l67 flash
so if i get a ecu with them numbers a stock l67 bin can be flashed onto it?
such as the enhanced one i already have?
such as the enhanced one i already have?