Vy flash

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Post Reply
nutbag355
Posts: 130
Joined: Tue Nov 29, 2016 2:59 pm
cars: bf xr6 turbo
vs ss
vr clubsport
Location: Rockhampton

Vy flash

Post by nutbag355 »

Hi all, is it possible to flash a vy v6 pcm out of the vehicle, and if so what do I need to set it up? I have been asked if I’m able to disable vats for a conversion. Is is as simple as power/earth/aldl enable wires?
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Vy flash

Post by Holden202T »

you'll need constant power and ignition power plus grounds, and you'll need the wires for the aldl plug also and i think that should be all you need.
nutbag355
Posts: 130
Joined: Tue Nov 29, 2016 2:59 pm
cars: bf xr6 turbo
vs ss
vr clubsport
Location: Rockhampton

Re: Vy flash

Post by nutbag355 »

Awesome. Thanks mate. I was hoping that’s all that’ll be required.
User avatar
oldn64
Posts: 256
Joined: Mon May 28, 2018 5:05 pm
cars: Vq Statesman, VE SS wagon, VE Sv6, VY SV8, VL Belina
Location: Country Victoria on a direct road to WINTON

Re: Vy flash

Post by oldn64 »

nutbag355 wrote:Awesome. Thanks mate. I was hoping that’s all that’ll be required.
Obviously you will need PC, tuning software and aldl cable interface as well.

Tell us more about the conversion too. :) we are all car nuts after all!!

cheers
oldn64
User avatar
efid
Posts: 4
Joined: Tue Jul 24, 2018 3:50 pm
cars: 68 Mercury Cyclone GT

Re: Vy flash

Post by efid »

Whos the best to get the hardware required to do this sort of thing.
User avatar
oldn64
Posts: 256
Joined: Mon May 28, 2018 5:05 pm
cars: Vq Statesman, VE SS wagon, VE Sv6, VY SV8, VL Belina
Location: Country Victoria on a direct road to WINTON

Re: Vy flash

Post by oldn64 »

efid wrote:Whos the best to get the hardware required to do this sort of thing.
Welcome aboard efid,

all of the things can be sourced through the website here.

What are you hoping to do and with what?

Cheers
oldn64
User avatar
efid
Posts: 4
Joined: Tue Jul 24, 2018 3:50 pm
cars: 68 Mercury Cyclone GT

Re: Vy flash

Post by efid »

Adding it to the current vehicles I can tune as I run a dyno and have need to fill a hole. Havent searched much before as I have had enough to do but now just looking at expanding a bit more.
nutbag355
Posts: 130
Joined: Tue Nov 29, 2016 2:59 pm
cars: bf xr6 turbo
vs ss
vr clubsport
Location: Rockhampton

Re: Vy flash

Post by nutbag355 »

oldn64 wrote:
nutbag355 wrote:Awesome. Thanks mate. I was hoping that’s all that’ll be required.
Obviously you will need PC, tuning software and aldl cable interface as well.

Tell us more about the conversion too. :) we are all car nuts after all!!

cheers
oldn64
Hey mate, not sure on the conversion but can find out :thumbup:

And yep, already have all the hardware and software required to preform the task. Will try and keep you posted
Post Reply