L67 Mafless tune New Zealand??????

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Post Reply
VSL67_NZ
Posts: 2
Joined: Thu Aug 23, 2018 1:26 pm
cars: 96 VS L67 Manual
96 VS S pac manual

L67 Mafless tune New Zealand??????

Post by VSL67_NZ »

I have a L67 that I am hopefully to going to do a hybrid intercooler set up on. I purchased a a2a plate before fully researching how to go mafless. So if anyone knows who in New Zealand is using Kalmaker or if anyone has any other reasonably priced options please let me know as I’m a bit stuck having spent so much on intercooler stuff for it to maybe be unaffordable to install it.

:driving:
User avatar
charlay86
Posts: 584
Joined: Thu Sep 17, 2009 2:00 pm
cars: VT S1 SS (L67)
Location: Perth, WA

Re: L67 Mafless tune New Zealand??????

Post by charlay86 »

Why are you wanting to go maf less?
VSL67_NZ
Posts: 2
Joined: Thu Aug 23, 2018 1:26 pm
cars: 96 VS L67 Manual
96 VS S pac manual

Re: L67 Mafless tune New Zealand??????

Post by VSL67_NZ »

As all the forums say that tuning a2a or even hybrid is not so good with a maf sensor
immortality
Posts: 3416
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: L67 Mafless tune New Zealand??????

Post by immortality »

Check out the user 0081, he's running a hybrid A2A/W2A setup using enhanced code and MAF to tune. Getting good results. He has a full build thread on the L67 Torque forum.
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: L67 Mafless tune New Zealand??????

Post by delcowizzid »

What part of nz if its vs I would fit a vr loom and run a vr ecu and tune it to suit .I can sort it all if you are in the lower north
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Post Reply