PCM questions regarding L67 Swap into VY

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Posts: 97
Joined: Sat Jan 18, 2020 8:34 am
Location: Mid North Coast N.S.W

Re: PCM questions regarding L67 Swap into VY

Postby VYL67L03 » Fri Jan 31, 2020 1:15 pm

Ahh ok no worries Antus, Pretty easy fix which is great, Will get rid of files and start fresh :thumbup:

Posts: 97
Joined: Sat Jan 18, 2020 8:34 am
Location: Mid North Coast N.S.W

Re: PCM questions regarding L67 Swap into VY

Postby VYL67L03 » Fri Jan 31, 2020 2:42 pm

Got the Log done :thumbup:
Attachments
new log.xdl
(144.23 KiB) Downloaded 21 times

Posts: 97
Joined: Sat Jan 18, 2020 8:34 am
Location: Mid North Coast N.S.W

Re: PCM questions regarding L67 Swap into VY

Postby VYL67L03 » Fri Jan 31, 2020 2:44 pm

These are the files i have used
Attachments
VY_V6_$060A_Enhanced_v0.9e.xdf
(312.79 KiB) Downloaded 15 times
VY_V6_$060A_Enhanced_v0.9c.adx
(147.4 KiB) Downloaded 18 times
VY_V6_$060A_Enhanced_v0.9a.bin
(128 KiB) Downloaded 15 times

Posts: 97
Joined: Sat Jan 18, 2020 8:34 am
Location: Mid North Coast N.S.W

Re: PCM questions regarding L67 Swap into VY

Postby VYL67L03 » Fri Jan 31, 2020 3:36 pm

does the timing and base injector rate and everything look ok, The1 told me the base injector rate for the L67 36LB injectors and i have changed that and re-flashed the Bin & Cal files but the engine still won't start, It sounded more promising though but won't stay running, In the Log i was cranking for a while than paused and cranked again for a bit, Done that a few times to get a better Log :x

Posts: 97
Joined: Sat Jan 18, 2020 8:34 am
Location: Mid North Coast N.S.W

Re: PCM questions regarding L67 Swap into VY

Postby VYL67L03 » Fri Jan 31, 2020 3:57 pm

Please help, anyone.

Posts: 97
Joined: Sat Jan 18, 2020 8:34 am
Location: Mid North Coast N.S.W

Re: PCM questions regarding L67 Swap into VY

Postby VYL67L03 » Fri Jan 31, 2020 7:02 pm

anyone out there ??

Posts: 1163
Joined: Sun Mar 15, 2009 10:20 am
Location: Geelong, VIC

Re: PCM questions regarding L67 Swap into VY

Postby yoda69 » Fri Jan 31, 2020 7:05 pm

I’m not in front of a computer so can’t check the files, but make sure you also change the cranking fuel times as with larger injectors will be flooding the engine when cranking. Look at a supercharged VT-VY bin and see what it uses for cranking fuel and copy over.

Posts: 97
Joined: Sat Jan 18, 2020 8:34 am
Location: Mid North Coast N.S.W

Re: PCM questions regarding L67 Swap into VY

Postby VYL67L03 » Fri Jan 31, 2020 7:10 pm

Thanks for the reply, Ok no probs will do that right now, Ive also changed the base injector rate as per what The1 has told me - 213.87 MSEC/GRAM

Posts: 97
Joined: Sat Jan 18, 2020 8:34 am
Location: Mid North Coast N.S.W

Re: PCM questions regarding L67 Swap into VY

Postby VYL67L03 » Fri Jan 31, 2020 7:24 pm

Not sure what's going on but every time i try to compare files some whacky looking numbers come up, Am i doing something wrong ?? lol
Attachments
comparing files.jpg

Site Admin
User avatar
Posts: 6091
Joined: Sat Feb 28, 2009 8:34 pm

Re: PCM questions regarding L67 Swap into VY

Postby antus » Fri Jan 31, 2020 7:33 pm

Im not in front of a pc, but your comparing a $060a and an $07 so the same xdf wont work for both at the same time. Look under tools and you can launch a second copy of tunerpro then you can have a bin with its matching xdf in both copies.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

PreviousNext

Return to Holden ALDL ECUs

Who is online

Users browsing this forum: No registered users and 5 guests