Hi Guys,
I am wondering if some of you could help me with a project i am doing. I have a holden 308 carburettor with a 4l60E transmission. This trans needs the PCM to operate. I am wanting to add the 16234531 PCM to this transmission to operate correctly and i am unsure what inputs the PCM will need to operate correctly. I know it will need a TPS and coil (tacho) signal, but not sure what else it will need to function. TIA! Shadow1976
Running 16234531 PCM on carb vehicle
-
- Posts: 1
- Joined: Sun Dec 30, 2018 9:30 am
- cars: Ht Belmont, Vy commodore, ZB commodore
- antus
- Site Admin
- Posts: 8251
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Running 16234531 PCM on carb vehicle
There is some discussion the subject in this thread. I think it may be referring to 11P, but its pretty much the same deal. If you do it please report back exactly what was needed.
viewtopic.php?f=15&t=5234&p=77594#p77612
viewtopic.php?f=15&t=5234&p=77594#p77612
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396