vx l67 ski boat problems
-
- Posts: 1215
- Joined: Sun Mar 15, 2009 10:20 am
- cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual - Location: Geelong, VIC
Re: vx l67 ski boat problems
Whereabouts are you located?
You may find somebody on here nearby that could have a look and possibly help a little.
You may find somebody on here nearby that could have a look and possibly help a little.
Re: vx l67 ski boat problems
wangaratta vic
Re: vx l67 ski boat problems
Wondering if my best solution is to get the ALDL interface cable and a pcmhacking NVRAM with the vx l67 tune. At least I would know the software and lead are good and I can go from there.
Any thoughts?
Any thoughts?
- vlad01
- Posts: 7803
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: vx l67 ski boat problems
good idea! PCMhacking hardware is well known to work properly. The alternatives out there are very hit and miss which most here would agree.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- jenko
- Posts: 450
- Joined: Wed Jan 29, 2014 3:43 pm
- cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon - Location: Pine mountain .vic
- Contact:
Re: vx l67 ski boat problems
What prop are you running
Re: vx l67 ski boat problems
12/12 4blade with a fair bit of cupping. Barefoot at 4300rpm
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: vx l67 ski boat problems
another option if someone has the bench setup for your PCM, send the pcm and tune, if it can be bench tested then you will at least know if its the wiring or the pcm .....
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: vx l67 ski boat problems
So I now have a NVRAM with enhanced tune and a pcmhacking aldl cable which will let me connect, but the engine won't start on the enhanced tune. Have spark but no injector pulse. Gives error code 31 (coms error). Have also got hold of another pcm and tried it with same result.
Anyone got any ideas?
Anyone got any ideas?
-
- Posts: 591
- Joined: Thu Nov 03, 2011 7:57 pm
- cars: hsv enhanced vs ss
vt xu6
fb holden
toyota landcruiser
vt ss s1 - Location: perth wa
Re: vx l67 ski boat problems
I say vats(security) is still on. You will have to tick the box marked “theft deterrent” in the flags section and flash/ burn back onto the nvram.
Re: vx l67 ski boat problems
Theft deterrent is off. I don't get the coms error until drank it over though.