215i bin

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Post Reply
Kevspec
Posts: 158
Joined: Wed Jan 23, 2019 12:14 am
cars: Vs 215i grange

215i bin

Post by Kevspec »

Hi im after a 215i auto bin as the ones listed on the site are not correct in VE, SPARK and cranking fuel tables
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: 215i bin

Post by delcowizzid »

The 3 in the stock bin thread is probably all the factory released tunes all to suit 24lb injectors 5.7L.if you have any mods they will be need tweaked to suit
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Kevspec
Posts: 158
Joined: Wed Jan 23, 2019 12:14 am
cars: Vs 215i grange

Re: 215i bin

Post by Kevspec »

I've loaded the 5.7 bin and setup my wideband but with help of another user so far fueling setup is way off and I even noticed all knock setup was disabled so no idea what's with the bins. I obviously I have factory chip but no way of pulling that file for nvram
Kevspec
Posts: 158
Joined: Wed Jan 23, 2019 12:14 am
cars: Vs 215i grange

Re: 215i bin

Post by Kevspec »

Also what are the correct adx and xdf car for a 215i 5.7?
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: 215i bin

Post by delcowizzid »

Probably $83 it should say in the file details in the stock bin thread .there is no ose $12p 5.7L bin for the nvram only 5L
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Kevspec
Posts: 158
Joined: Wed Jan 23, 2019 12:14 am
cars: Vs 215i grange

Re: 215i bin

Post by Kevspec »

its 11p sorry if i havent mentioned that
Charlescrown
Posts: 1833
Joined: Sat Aug 06, 2011 7:58 am
cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes
Location: Padstow NSW

Re: 215i bin

Post by Charlescrown »

11P has the 165kw base program. You need to change all those parts of the bin from the 215 bin.
Kevspec
Posts: 158
Joined: Wed Jan 23, 2019 12:14 am
cars: Vs 215i grange

Re: 215i bin

Post by Kevspec »

which parts? and is there all 215 files or is it a mix?
User avatar
antus
Site Admin
Posts: 8250
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: 215i bin

Post by antus »

get the factory 215 tune, and its xdf, sounds like its $83, then find a factory equivalent in the same program ($83?) and use the compare function in tunerpro to see whats different. Then take an educated guess as to which changes sound relevant to the size of the engine and not how far those items were changed. Then you'll have an idea what to look for in 11P and how far to change those items. Its time consuming, but that might be whats required here.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: 215i bin

Post by delcowizzid »

i cut and pasted some of the major stuff into your tune in the shiftpoint thread i started with a fresh copy of the 11p v8 bin file theres a lot of weirdness going on running your bin start fresh all the way from loading the stacked v8 bin out of the latest ose$11p zip folder onto your nvram with a programmer so you know the file isnt corrupt at any addresses then flash cal with ose flash tool using my bin as the cal to flash
edit ive added a stacked bin ready to go on the nvram so its burn and go in your programmer without having to flash any cal in afterwards.itsfar from every 215 specific setting swapped over into it but has the 215 ve and spark tables and injector bias settings crank pulsewidths etc give it a try see how it runs
OSE_$11P V104 Delco 215 mod kev.BIN
(64 KiB) Downloaded 206 times
edit reuploaded new bins tunerpro copy right to left in the difference tool window is broken nothing saves LOL
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Post Reply