shift points

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Kevspec
Posts: 152
Joined: Wed Jan 23, 2019 12:14 am
cars: Vs 215i grange

Re: shift points

Post by Kevspec »

im happy to help especially since everyone here is helping me and from what im being told with corrector its easy to put after as messes to much other stuff and easy to sort out
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: shift points

Post by antus »

Yeah, it messes up the shift points, so your looking to make the sameish changes to the same tables (but for different reasons) as what you would need to do if you were to put it before the computer.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: shift points

Post by VL400 »

You need to modify the kickdown settings, these are used at (or near) WOT. There is a KPH and RPM threshold, both have to be met for it to shift.
Kevspec
Posts: 152
Joined: Wed Jan 23, 2019 12:14 am
cars: Vs 215i grange

Re: shift points

Post by Kevspec »

Have found all the tables will go for drive shortly to test I also found a calculator to work out speed vs rpm with the gearbox ratios
Kevspec
Posts: 152
Joined: Wed Jan 23, 2019 12:14 am
cars: Vs 215i grange

Re: shift points

Post by Kevspec »

ok went for a drive logged it seems to still hit limiters way before ive set everything
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: shift points

Post by delcowizzid »

So your hitting the limiter before the shift not shifting to early? I thought it wasn't reving out far enough before shifting
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Kevspec
Posts: 152
Joined: Wed Jan 23, 2019 12:14 am
cars: Vs 215i grange

Re: shift points

Post by Kevspec »

It's not and I've set all limters to 6200 and 6300 but won't go further then 5800 in gear
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: shift points

Post by antus »

Maybe post up a bin and a log?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
immortality
Posts: 3416
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: shift points

Post by immortality »

What car/engine drive train mods etc?

Maybe it'll only rev to 5800 under full load.

You also need to remember that it takes time for the trans to shift so you need to give it a couple of hundred rpm margin.
Kevspec
Posts: 152
Joined: Wed Jan 23, 2019 12:14 am
cars: Vs 215i grange

Re: shift points

Post by Kevspec »

here is my bin and log if anyone wants to look over it
Attachments
shift control.xdl
(104.43 KiB) Downloaded 261 times
Kevspecwideband.bin
(64 KiB) Downloaded 270 times
Post Reply