supercharged vn v8

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Posts: 1132
Joined: Sun Mar 15, 2009 10:20 am
Location: Geelong, VIC

Re: supercharged vn v8

Postby yoda69 » Fri Jun 28, 2019 7:51 am

Try Biggvl with 2 g’s and not bigvl

User avatar
Posts: 2055
Joined: Fri Mar 14, 2014 8:37 pm
Location: Bacchus Marsh, Vic

Re: supercharged vn v8

Postby Biggvl » Fri Jun 28, 2019 7:52 am

:lol: :lol: :lol:
According to chemistry, alcohol is a solution...

Posts: 11
Joined: Mon May 23, 2016 7:19 pm

Re: supercharged vn v8

Postby Blown vl » Fri Jun 28, 2019 2:41 pm

Sorted now, not sure what was going on I just clicked the profile and send message
All good tho have made contact

Posts: 11
Joined: Mon May 23, 2016 7:19 pm

Re: supercharged vn v8

Postby Blown vl » Fri Jul 05, 2019 5:21 pm

Ok i have connected to the car today and taken a recording of the throttle that jumps. i used
Kalmaker_SP3_N05 TP5 delco.adx and KALMAKER SP3 N03 XDFversion 1.xdf.

here is the file
throttle problem warm.xdl
(17.93 KiB) Downloaded 14 times


hopefully i have done this right if not some guidance would be appreciated, Also cn i extract the tune file from my kalmaker tuned ecu for some one to convert?

Posts: 11
Joined: Mon May 23, 2016 7:19 pm

Re: supercharged vn v8

Postby Blown vl » Fri Jul 12, 2019 11:17 am

Hey guys don't suppose anyone had a look at the log I posted? Also does anyone have a bin file I could use on this engine while doing the data logs?

Posts: 1
Joined: Wed Jul 17, 2019 6:58 pm

Re: supercharged vn v8

Postby rohan » Wed Jul 17, 2019 7:02 pm

Last edited by rohan on Thu Jul 18, 2019 1:27 pm, edited 1 time in total.

User avatar
Posts: 4978
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: supercharged vn v8

Postby delcowizzid » Wed Jul 17, 2019 7:13 pm

I'll have a look at the log later if I get a chance
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Posts: 11
Joined: Mon May 23, 2016 7:19 pm

Re: supercharged vn v8

Postby Blown vl » Thu Jul 18, 2019 6:00 pm

Great thanks Delco wizard, I'm just wanting to get the thing sorted to use it a bit and then start winding it up!

Previous

Return to Holden ALDL ECUs

Who is online

Users browsing this forum: No registered users and 4 guests