I reqire help to set up an 808

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Online
Posts: 64
Joined: Mon Jun 09, 2014 12:45 pm

I reqire help to set up an 808

Postby ladaok » Mon Jul 01, 2019 12:55 pm

Hello. I reside in Te Puke. a small town within the North Island of New Zealand .. I'm hoping to find someone
who can help show me how to set up the electronics to convert my project car to FI. I have the 808 & navram bits, but I am missing the laptop, wiring plugs and sensors at present. I dont think this is a biggy, possibly the L/T is important ? I have had contact with a fellow at the bottom of the South Island, who has been very helpful but this is well over a 1000 Km away from me

So the call goes out for someone who maybe closer ....Ta

robbie

User avatar
Posts: 232
Joined: Sun Jan 25, 2015 4:21 pm
Location: Sydney

Re: I reqire help to set up an 808

Postby j_ds_au » Mon Jul 01, 2019 1:27 pm

Yeah, you'll at least need a laptop and a comm's adaptor board for your '808 to get started. Can't help you proximity wise.

Joe.

Online
Posts: 64
Joined: Mon Jun 09, 2014 12:45 pm

Re: I reqire help to set up an 808

Postby ladaok » Mon Jul 01, 2019 1:38 pm

I think I have a com adapt boad ?

User avatar
Posts: 232
Joined: Sun Jan 25, 2015 4:21 pm
Location: Sydney

Re: I reqire help to set up an 808

Postby j_ds_au » Mon Jul 01, 2019 2:56 pm

ladaok wrote:I think I have a com adapt boad ?

This is it :
viewtopic.php?f=14&t=3613

There was/is also an earlier RS-232 version.
Edit, this one can be seen here :
viewtopic.php?f=14&t=5222

Joe.

User avatar
Posts: 4861
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: I reqire help to set up an 808

Postby delcowizzid » Mon Jul 01, 2019 3:22 pm

Did I fit your boards in your ecu ages ago
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Online
Posts: 64
Joined: Mon Jun 09, 2014 12:45 pm

Re: I reqire help to set up an 808

Postby ladaok » Mon Jul 01, 2019 5:09 pm

Hello Delco.... yes you did, & thank you for all the effort. I need to see a plain jane with no last name 808 set up, so I can copy, just to get going
would you know of a person that could help ... I don't mind travelling ... seeing is believing.

robbie

User avatar
Posts: 4861
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: I reqire help to set up an 808

Postby delcowizzid » Mon Jul 01, 2019 10:38 pm

I could probably make you up a standalone loom if that's what you need to get it on your engine and running
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Online
Posts: 64
Joined: Mon Jun 09, 2014 12:45 pm

Re: I reqire help to set up an 808

Postby ladaok » Tue Jul 02, 2019 5:54 am

hello Delco.

The chap in the SI sent pictures of his 808 set up on a bench to the L/T and he was able to test in/outputs ( I think).... but as always, they have disappeared on the ethernet

I can dig around and procure sensors and original connectors and looms ... maybe see if I can ask the fellow to send pics again

Just hoping someone in the BOP has the knowledge

Ta muchly Delco, and I still owe you the freight

robbie

Online
Posts: 64
Joined: Mon Jun 09, 2014 12:45 pm

Re: I reqire help to set up an 808

Postby ladaok » Mon Aug 05, 2019 6:21 am

(1)
Removing the ' 808 ' from some packaging, I notice that there is now a big black object that looks like a relay ,,,NAVRAM ? and a mod inside with wiring to the side of the ecu chassis ....this is the communication port with cable to a laptop ?? ... does this mean I don't need a flash tool and you don't need to use the original ecu connecter to make changes to a file ?

(2)
I seem to be having a heck of a job finding plugs and associated wiring to / from the ECU ( @ a reasonable cost ) ...It appears Dick Turpin is alive and well ! Are there unwired plugs avaliable, How many wires are actually needed to / from the ECU

User avatar
Posts: 9758
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: I reqire help to set up an 808

Postby Holden202T » Mon Aug 05, 2019 9:30 am

are you referring to something like this ? (but a usb port)

808 - realtime setup2.jpg
808 - realtime setup2.jpg (166.15 KiB) Viewed 113 times

If so then you still need the flash tool which allows you to read and write the tune to the nvram.

Next

Return to Holden ALDL ECUs

Who is online

Users browsing this forum: No registered users and 5 guests