Vs v8 manual

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Posts: 18
Joined: Thu Jul 11, 2019 10:02 am

Vs v8 manual

Postby Troy » Thu Jul 11, 2019 12:49 pm

Hi I have just rebuilt my engine in my vs v8 and converted it to manual but been trying to retune it but can't seem to get it right would anyone here be able to help me out please I'd really appreciate it

Posts: 3173
Joined: Mon Aug 02, 2010 6:35 pm

Re: Vs v8 manual

Postby Dylan » Thu Jul 11, 2019 1:00 pm

Hi mate, post up a log and matching bin. That'll make it easier to see what's needed.

Posts: 18
Joined: Thu Jul 11, 2019 10:02 am

Re: Vs v8 manual

Postby Troy » Thu Jul 11, 2019 1:11 pm

Hey mate at the moment it's just a stock vs v8 auto bin but get fault codes because of the auto and when I try make changes I end up in limp mode

Posts: 18
Joined: Thu Jul 11, 2019 10:02 am

Re: Vs v8 manual

Postby Troy » Thu Jul 11, 2019 1:47 pm

If someone would be able to help me out of really appreciate it

Posts: 1
Joined: Fri Jul 05, 2019 9:58 pm

Re: Vs v8 manual

Postby Phantom » Thu Jul 11, 2019 2:03 pm

Auto and Manual use a different PCM in the VS .
here is one out of my old files , may be a kalmaker bin not sure
MAN_AUTO.BIN
(64 KiB) Downloaded 19 times
but was a std 5l Auto converted to Manual on the auto computer

Posts: 18
Joined: Thu Jul 11, 2019 10:02 am

Re: Vs v8 manual

Postby Troy » Thu Jul 11, 2019 2:18 pm

Yeah I've been trying to change the vs v8 auto bin to disable all the auto trans codes and do a few performance tweaks to suit my new setup but just been haveing troubles as I've only really use to tuning vt l67 before so probably me doing something wrong, thanks heaps mate il give your bin a try hopefully will work a bit better then mine until someone can help me out

Posts: 18
Joined: Thu Jul 11, 2019 10:02 am

Re: Vs v8 manual

Postby Troy » Thu Jul 11, 2019 2:25 pm

Phantom wrote:Auto and Manual use a different PCM in the VS .
here is one out of my old files , may be a kalmaker bin not sure
MAN_AUTO.BIN
but was a std 5l Auto converted to Manual on the auto computer


Will this work and disable all trans fault codes ?? Also is vats disabled ? Thanks so much for your help I really appreciate it

Posts: 2577
Joined: Thu Apr 09, 2009 12:31 pm

Re: Vs v8 manual

Postby immortality » Thu Jul 11, 2019 5:48 pm

Have you changed the checksum to AA ?

Posts: 18
Joined: Thu Jul 11, 2019 10:02 am

Re: Vs v8 manual

Postby Troy » Thu Jul 11, 2019 6:02 pm

immortality wrote:Have you changed the checksum to AA ?



Yeah I changed checksum to AA I even just tried burning a $11p v8 bin file with auto codes switched off but still seems not to be working when I started it idled high and engine light lit so don't know what I'm doing wrong

Posts: 18
Joined: Thu Jul 11, 2019 10:02 am

Re: Vs v8 manual

Postby Troy » Thu Jul 11, 2019 7:28 pm

Dylan wrote:Hi mate, post up a log and matching bin. That'll make it easier to see what's needed.
Attachments
OSE_$11P V104 BLCC V8_Manual.bin
(64 KiB) Downloaded 17 times

Next

Return to Holden ALDL ECUs

Who is online

Users browsing this forum: No registered users and 5 guests