Can someone help?
-
- Posts: 19
- Joined: Thu Jul 11, 2019 10:02 am
- cars: Factory vl v8 wagon
Vl v8 wagon burnout car
Supercharged vt l67 manual
Can someone help?
Ive got a holden 304 with a 4761 cam installed but it's running std tune and running really rough and fouling the plugs I've got all the tuning gear to burn a new memcal ect just winding if anyone can help me with the changes I need to make to get it running okay to be able to take it to the dyno in a few weeks I'd really appreciate if anyone could help
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Can someone help?
get the bin file from the car with the flash tool, zip it up and upload it here, then someone might be able to go from there for you.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 19
- Joined: Thu Jul 11, 2019 10:02 am
- cars: Factory vl v8 wagon
Vl v8 wagon burnout car
Supercharged vt l67 manual
Re: Can someone help?
His the current bin file the car is running on and cam specs below if anyone can help me I'd really appreciate itHolden202T wrote:get the bin file from the car with the flash tool, zip it up and upload it here, then someone might be able to go from there for you.
- Attachments
-
- 20190725_202409.jpg (100.86 KiB) Viewed 3176 times
-
- 11P Manual Vl wagon.bin
- (64 KiB) Downloaded 192 times
-
- Posts: 22
- Joined: Sun Oct 25, 2015 5:08 pm
- cars: 96 Vs ss manual
97 Vs v8 Calais
09 Ve ssv manual
17 vf ssv redline manual - Location: Central Queensland
Re: Can someone help?
Is the engine standard apart from the cam? Or modified? Compression, heads? etc..
That's a fair sized cam for a 304, tight seperation angle too.
That's a fair sized cam for a 304, tight seperation angle too.
-
- Posts: 19
- Joined: Thu Jul 11, 2019 10:02 am
- cars: Factory vl v8 wagon
Vl v8 wagon burnout car
Supercharged vt l67 manual
Re: Can someone help?
The engine has shaved heads , 040 oversized pistons , little head work it drives okay and has lots of power just does idle great and is fouling the plugs really bad atmoss96 wrote:Is the engine standard apart from the cam? Or modified? Compression, heads? etc..
That's a fair sized cam for a 304, tight seperation angle too.
Re: Can someone help?
Before running a new tune probably need to replace the plugs. They're generally dead at this point.
Also check the oil isn't diluted with petrol.
Also check the oil isn't diluted with petrol.
-
- Posts: 19
- Joined: Thu Jul 11, 2019 10:02 am
- cars: Factory vl v8 wagon
Vl v8 wagon burnout car
Supercharged vt l67 manual
Re: Can someone help?
Okay mate defiantly gonna change plugs and oil first. Is anti vats switched off in this tune? And what xdf suits ?Dylan wrote:Before running a new tune probably need to replace the plugs. They're generally dead at this point.
Also check the oil isn't diluted with petrol.
Re: Can someone help?
VATS off yes, 12P V1.12
-
- Posts: 19
- Joined: Thu Jul 11, 2019 10:02 am
- cars: Factory vl v8 wagon
Vl v8 wagon burnout car
Supercharged vt l67 manual
Re: Can someone help?
Dylan wrote:VATS off yes, 12P V1.12
Okay cause I just tried the bin file and couldn't even took up to the computer and was in limp mode
- antus
- Site Admin
- Posts: 8251
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Can someone help?
The original bin up there is 11P, not 12P. It'll be a '424 computer and 12P wont be compatible.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396