VN ecu wiring and plugs

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Posts: 64
Joined: Mon Jun 09, 2014 12:45 pm

VN ecu wiring and plugs

Postby ladaok » Wed Aug 07, 2019 2:14 pm

Is the loom & plugs to / from from a VN model V8 ok to use for my 4 cylinder project using te ' 8o8 ' ?
...ta

User avatar
Posts: 2033
Joined: Fri Mar 14, 2014 8:37 pm
Location: Bacchus Marsh, Vic

Re: VN ecu wiring and plugs

Postby Biggvl » Wed Aug 07, 2019 2:20 pm

Yes, they're all the same :thumbup:
According to chemistry, alcohol is a solution...

Posts: 64
Joined: Mon Jun 09, 2014 12:45 pm

Re: VN ecu wiring and plugs

Postby ladaok » Thu Aug 08, 2019 9:27 am

Ta.... I am realizing there is lots of info here that either I haven't read or have forgotten ... in fact probably enough to get myself going on a laptop, I am re reading all the set up / startup posts, ....if anyone wants to chip in with a logical sequence of instructions for a bunny, feel free to add your pennies worth

User avatar
Posts: 2033
Joined: Fri Mar 14, 2014 8:37 pm
Location: Bacchus Marsh, Vic

Re: VN ecu wiring and plugs

Postby Biggvl » Thu Aug 08, 2019 9:44 am

Start with the green FAQ button, read and re-read :thumbup:
According to chemistry, alcohol is a solution...

Site Admin
User avatar
Posts: 5710
Joined: Sat Feb 28, 2009 8:34 pm

Re: VN ecu wiring and plugs

Postby antus » Thu Aug 08, 2019 1:13 pm

The v8 loom is fine, the mods you'll need will be less injectors (obviously), and the v8 ignition module has different connectors. The 808 is the same 4 wire interface to the various modules though, so you can replace put the connectors you need on the loom for the ignition module you plan to run.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Return to Holden ALDL ECUs

Who is online

Users browsing this forum: No registered users and 4 guests