Is the loom & plugs to / from from a VN model V8 ok to use for my 4 cylinder project using te ' 8o8 ' ?
...ta
VN ecu wiring and plugs
Re: VN ecu wiring and plugs
Yes, they're all the same
According to chemistry, alcohol is a solution...
Re: VN ecu wiring and plugs
Ta.... I am realizing there is lots of info here that either I haven't read or have forgotten ... in fact probably enough to get myself going on a laptop, I am re reading all the set up / startup posts, ....if anyone wants to chip in with a logical sequence of instructions for a bunny, feel free to add your pennies worth
Re: VN ecu wiring and plugs
Start with the green FAQ button, read and re-read
According to chemistry, alcohol is a solution...
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: VN ecu wiring and plugs
The v8 loom is fine, the mods you'll need will be less injectors (obviously), and the v8 ignition module has different connectors. The 808 is the same 4 wire interface to the various modules though, so you can replace put the connectors you need on the loom for the ignition module you plan to run.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396