Getting Started Guide

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
User avatar
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
Location: Perth, WA

Re: Getting Started Guide

Postby VL400 » Wed Sep 04, 2013 12:23 am

Have you asked the seller how to use the software you purchased?

There is software to reflash v6 non s/c pcms here but its free .. viewtopic.php?f=3&t=82

Can likely flash in a manual tune. If its s/c will need to set the PCM to manual (which masks the error codes for the now missing auto) by making a cal change and the log it to see what the IAC counts do.

Posts: 2
Joined: Tue Sep 03, 2013 9:19 pm

Re: Getting Started Guide

Postby Adamesk » Wed Sep 04, 2013 10:45 am

Yeah i have but the seller told me to go to this website for help from u guys? My vx is not a super6, so i should download that software? Then what do i do? Can you please walk me through it?

Site Admin
User avatar
Posts: 6507
Joined: Sat Feb 28, 2009 8:34 pm

Re: Getting Started Guide

Postby antus » Wed Sep 04, 2013 11:01 am

Catch 22, we like helping people tune their cars, but when ebay sellers take all the free stuff we made then sell it and shove the cash in their pockets and send people here to use our time (and of course they are not even community members themselves) it gets under our skin :evil: Its probably best you click the faq icon up the top and read the guides there (although they're probably what you paid for) and try and get as much understanding as you can. Then hit us with specific questions.

Also note we cant and wont support low quality ebay clones of our quality hardware. If you have setup problems, they should definitely be asked of the ebay seller as the product may not even work. See here: viewtopic.php?f=7&t=2685
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

User avatar
Posts: 149
Joined: Sun Mar 01, 2009 9:57 am
Location: Darwin, NT

Re: Getting Started Guide

Postby Apples » Thu Sep 05, 2013 12:15 pm

I would Like to see the Ebay store selling this stuff as every time I search I don't find anything.
Don't make excuses. Make more horsepower.

User avatar
Posts: 6837
Joined: Mon Oct 08, 2012 6:41 pm
Location: Kyneton, Vic

Re: Getting Started Guide

Postby vlad01 » Wed Sep 11, 2013 10:37 am

can you report the sellers for this and have them band?

I would be really pissed if someone was making money of my work thats suppose to be free.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.

Site Admin
User avatar
Posts: 6507
Joined: Sat Feb 28, 2009 8:34 pm

Re: Getting Started Guide

Postby antus » Wed Sep 11, 2013 10:49 am

I know who he is but what he is doing is perfectly legal, but unethical. He was once an active community member but all that stopped when the ebay stuff started. It wouldnt be so bad if he did support his own stuff here but instead he just wastes our time and the end user suffers. Our software is free for the greater good. Its just a pitty so many people go to ebay and dont do proper research first. Time pending we may start our own ebay store one day, but that discussion can be had in another thread. This is for the getting started guide.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Posts: 2
Joined: Sun Aug 10, 2014 7:22 pm

Re: Getting Started Guide

Postby eco231 » Sun Aug 10, 2014 7:54 pm

hi guys i need a change my rev limit for my vn how do you do that

Site Admin
User avatar
Posts: 6507
Joined: Sat Feb 28, 2009 8:34 pm

Re: Getting Started Guide

Postby antus » Fri Aug 15, 2014 9:04 am

Start a new thread in "general tuning discussion" and ask there. Short answer: to reprogram the stock chip you need a uv erase and eprom programmer, tunerpro rt software, the1's bin id tool to ID your chip, then the matching XDF. To go realtime, read the guides under FAQ in the top right hand corner. Realtime nvram hardware + 12P software is the best tuning option.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Posts: 2
Joined: Sat Mar 01, 2014 4:41 pm
Location: THE GONG

Re: Getting Started Guide

Postby kon308 » Mon Feb 08, 2016 12:20 pm

Hi there guys, is there a phone number to contact to buy hardware? sent pm and no reply!!

Posts: 2814
Joined: Thu Apr 09, 2009 12:31 pm

Re: Getting Started Guide

Postby immortality » Mon Feb 08, 2016 1:10 pm

Give it a little time, all these guys do this voluntarily so sometimes it takes a little while to get a response.

VL400 is away for a bit so if you have tried to PM him I would suggest trying one of the other guys or posting in the thread of the item you're after.

PreviousNext

Return to Holden ALDL ECUs

Who is online

Users browsing this forum: No registered users and 8 guests