VS V6 Enhanced 60lbs injectors won’t pull enough fuel
-
- Posts: 28
- Joined: Tue Nov 29, 2016 10:55 am
- cars: VY SV8, VP SENATOR 5000i, VW Tiguan
VS V6 Enhanced 60lbs injectors won’t pull enough fuel
Trying to tune a Vs V6 using the enhanced pack and a ostritch but down low can’t get the injectors to pulse low enough to pull fuel. Above 2000rpm it’s fine and adjustments alter fueling, I even lowered the injector size to near 0gs and nothing changes. Am I missing something a idle fueling control table? Seems very odd as I believe plenty of people use a 60lb injector on a hot NA v6?
- vlad01
- Posts: 7780
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: VS V6 Enhanced 60lbs injectors won’t pull enough fuel
Not sure about enhanced tunes, but I know in 12P there is a min pulse width scalar which I had once a problem with. I have FoMoCo 6 hole 40lb injectors and the default was 6.XX ms and it just drowned the engine no matter now low I set things, found that min pulse setting and changed it to 2ms and it fixed the issue.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.