Holden 424 OBD2

j_ds_au · Post by **j_ds_au** » Wed Apr 15, 2020 9:24 pm

Fanny wrote:I started playing around with a android terminal and pluged in a usb ALDL cable but didn't get far

Perhaps something here can help? :
https://www.ftdichip.com/Android.htm

Joe.

Fanny · Post by **Fanny** » Tue Apr 21, 2020 3:06 am

Holden202T wrote:the obd aldl cable sold here is what i have used to connect an andriod tablet up to cars using aldldriod...

Thanks I've sent a PM to order one

Fanny · Post by **Fanny** » Fri May 08, 2020 4:03 am

I have received the ALDL cable from PCM hacking arrived over night it's much higher quality than the ones I have used from eBay runs great on the PC seems to have faster response reading,writing & displaying data in TunerProRT is much more stable and reliable works on my Android devices. I would recommend if your going to buy an ALDL Cable get one from here don't waste your money on a cheap built one. It would be nice to have an OBD2 at the same standard.

Now I have the ALDL cable supported under Android it was time to update my 2 din deck in the VY from a lollipop 6.2" display to an Eonon GA2180A 7" Android 10 had limited time to configure it's looking good so far, few pleasing points the IPS screen looks great the touch screen works very well, DSP has great sound even with the standard speakers (next upgrade) split screen, 2Gb Ram, Handsfree mic sounds great good noise cancelling with road noise and AC on high, fast boot adjustable sleep timer if your doing a quick stop and start & you don't go over the timer when you get back in the unit is playing music before you can spin the wheels, over night when the timer is exceed the first boot is still only 10 seconds or so, SWC learning setup for the steering wheel controls buttons no need for extra harness just connected 3 wires all 6 buttons work (hope to be able to use the buttons on other apps)

https://www.eonon.com/Android-Car-GPS/2 ... 2180A.html