I have been searching of a suitable flash base tune for a VY manual, ideally just with vats disabled. I was reading here viewtopic.php?f=27&t=2518 in the1s Enhanced bin section there are NA tunes listed here for flash based PCMs with vats disabled however no tune listes for VY manual (only auto) but vx bin is there.
Im a little confused as The hardware and software guide states that the1s Enhanced only works on NVRAM based pcms. Is this true?
Could someone kindly point me to a suitable tune (DTCF) with no VATS?
VY 5 speed Flash BIN no vats
-
antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: VY 5 speed Flash BIN no vats
you can use the auto bin, and set the manual transmission option, or read your current bin with the ose flash tool, and use the matching factory xdf to set the vats flag in that file, then flash the calibration back in. read the details about using the ose flash tool in its thread. mostly nobody is posting bins with just the vats changed as its a really easy edit to do yourself.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
Buttons17
- Posts: 2
- Joined: Fri Mar 13, 2020 3:42 pm
- cars: Vy Commodore V6 Manual Ute.
EJ Holden running vx V6 and auto (project)
Re: VY 5 speed Flash BIN no vats
Thanks mate, I will give it a try>