Connecting vy flash pcm to tunerpro

nutbag355 · Post by **nutbag355** » Fri May 01, 2020 8:35 am

Hi all so I’m tuning my first vy flashed based pcm. I Must be missing something, I’ve loaded the correct xdf etc etc and changed the acquisition to vy but it won’t connect to the pcm so I can take logs. What am I doing wrong?

Post by **delcowizzid** » Fri May 01, 2020 8:47 am

We're you able to suck the tune out of it with the ose flashtool

nutbag355 · Post by **nutbag355** » Fri May 01, 2020 9:03 am

hi mate, yep. ive been successfully tuning and using a snapon scan tool for logging but it is painfully slow due to having to swap devices in between logs and making a change.

Post by **antus** » Fri May 01, 2020 9:58 am

not sure what you mean aquisition to VY. you dont need to use oseplugin for VY. are you using the ADX from the enhanced tune?

Post by **delcowizzid** » Fri May 01, 2020 10:02 am

You will have to close the flash tool both it and tunerpro can tie up the comm port

nutbag355 · Post by **nutbag355** » Fri May 01, 2020 12:45 pm

antus wrote:not sure what you mean aquisition to VY. you dont need to use oseplugin for VY. are you using the ADX from the enhanced tune?

I wasnt aware not to use the plugin. yep, im using the $060A ADX and XDF

What should I have the Data aq./emulation set to?

Connecting vy flash pcm to tunerpro

Connecting vy flash pcm to tunerpro

Re: Connecting vy flash pcm to tunerpro

Re: Connecting vy flash pcm to tunerpro

Re: Connecting vy flash pcm to tunerpro

Re: Connecting vy flash pcm to tunerpro

Re: Connecting vy flash pcm to tunerpro