Wiring for VT Ecotec Engine Power
Re: Wiring for VT Ecotec Engine Power
not sure what your using but if it's VT V6 enhanced mod code then try this ive added ratio to xdf.
- Attachments
-
- VT_V6_$A5G_Enhanced_v1.0g.xdf
- (324.86 KiB) Downloaded 128 times
-
- Posts: 31
- Joined: Tue Nov 15, 2016 5:46 pm
- cars: Triumph TR7 - fitting a VT EcoTec+Auto
Toyota Celica ST185
Re: Wiring for VT Ecotec Engine Power
Thanks for that.
How do I tell which Code Version I have?
Forget that question, I've read your details.
How does this work...Is your code embedded in the Factory Code, or linked externally.
Is it bolt-on or a complete Bin replacement.
What version do I have to be running to start with, or isn't that relevant. AFAIK I've got VT Auto, VATS removed.
How do I tell which Code Version I have?
Forget that question, I've read your details.
How does this work...Is your code embedded in the Factory Code, or linked externally.
Is it bolt-on or a complete Bin replacement.
What version do I have to be running to start with, or isn't that relevant. AFAIK I've got VT Auto, VATS removed.
-
- Posts: 31
- Joined: Tue Nov 15, 2016 5:46 pm
- cars: Triumph TR7 - fitting a VT EcoTec+Auto
Toyota Celica ST185
Re: Wiring for VT Ecotec Engine Power
I want to alter the Fan Settings in my VT Auto, VATS Disabled MemCal.
I've installed TunerProRT, bought a Generic Programmer and made an adapter to mount the MemCal on the Programmer.
How do I go about reading and altering the MemCal...Do I alter it in-situ, or download it, change it etc?
I've installed TunerProRT, bought a Generic Programmer and made an adapter to mount the MemCal on the Programmer.
How do I go about reading and altering the MemCal...Do I alter it in-situ, or download it, change it etc?