Vss Signal on vy ecu

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Posts: 1
Joined: Mon Dec 16, 2019 10:24 pm

Vss Signal on vy ecu

Postby tubzbro » Sat Nov 14, 2020 1:31 pm

hey guys,

I have eco swapped a vg ute with a t5 gearbox on a vy loom and ecu im currently trying to get the ecu to read the vss signal i have had the ecu programmed to be manual and they didnt check the getrag option which is what we thought would allow the ecu to read the vss signal but im just seeing if anyone else has read a vss signal in the vy ecu and what pin you had the wire go to and how you had the manual options in the ecu.

Cheers.

User avatar
Posts: 340
Joined: Sun Jan 25, 2015 4:21 pm
Location: Sydney

Re: Vss Signal on vy ecu

Postby j_ds_au » Sun Nov 15, 2020 8:26 pm

If it helps, on a V6 VX, the transmission speed pick-up sensor goes to D1 and D2 on the PCM.

Joe.

Posts: 265
Joined: Mon Mar 09, 2020 4:35 pm
Location: California

Re: Vss Signal on vy ecu

Postby In-Tech » Sun Nov 15, 2020 11:41 pm

Hi,
I've not played much with the vss stuff but am curious if it even matters since it should be sine wave.
-Carl

Site Admin
User avatar
Posts: 6397
Joined: Sat Feb 28, 2009 8:34 pm

Re: Vss Signal on vy ecu

Postby antus » Tue Nov 17, 2020 2:15 pm

No the VG uses a hall effect sensor. This might be a problem, I am not sure though.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Return to Holden ALDL ECUs

Who is online

Users browsing this forum: No registered users and 9 guests