whipple 304 tune

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Posts: 575
Joined: Sun Jun 06, 2010 9:59 am
Location: Perth

whipple 304 tune

Postby Dazza92VP » Sun Feb 14, 2021 11:14 am

hey guys just wondering if anyone has a tune of some sort close to similar specs just to get started on this thing has the following specs
304 block standard rings pistons and heads
286 cam
1.65 roller rockers
660cc injectors
2 bar map
2.4l whipple water to air intercooler looks to be about 11-12psi dont really know just yet as havent been able run it up
extractors with twin 3"
th400 with we're thinking 3800 stall
ive set the ecu to control the kick down and the intercooler pump as well.
we built it and he took it straight to a reputable tuner supposedly and he couldnt even get it to idle correctly with out it fouling plugs and fumigating the shed in 30 secs of idle. i've managed to get it to idle now with out burning all the fossil fuels left in the world but just looking for a tune i can use to base it off little more closer to get started. I've done tweaks on maps and stuff before but i've never done boosted before and by the look of it started from absolute scratch with a map before ive attached what ive managed to use to get it running with the wideband and ve calc to get it idling better without fouling plugs but the ve map it horrible looking.
also does the 12p 2bar adx hae ve calc over 100kpa looks to be just a n/a ve calc sheet.
the log there is the last one before i packed up at the end of the night
Attachments
run3.xdl
(18.02 KiB) Downloaded 21 times
OSE12P V112 - 1,2 and 3 bar with intercooler control & kickdown contro.xdf
(462.85 KiB) Downloaded 20 times
OSE $12P V112 2bar V8 808 with intercooler control & kickdown control.BIN
(32 KiB) Downloaded 26 times

Online
User avatar
Posts: 6865
Joined: Mon Oct 08, 2012 6:41 pm
Location: Kyneton, Vic

Re: whipple 304 tune

Postby vlad01 » Sun Feb 14, 2021 2:07 pm

The included adx is missing the calcVE over 100Kpa. I do have one that goes to 170Pka which is about 10psi but not the full 2 bar.

It would be nice if the download for 12P on here included up to date ADXs for boost.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.

Posts: 575
Joined: Sun Jun 06, 2010 9:59 am
Location: Perth

Re: whipple 304 tune

Postby Dazza92VP » Sun Feb 14, 2021 2:37 pm

Do you mind if I grab that adx even though it’s missing the last few cells is better than nothing. Also that XDF I’ve uploaded I edited it so it has all the parameters sorted into correct labeled categories exactly like 11p does makes it easier to finds parameters. if anyone wants it without the flex output edits I can put it up as far as I know the xdf in the 12p thread is still unsorted

Online
User avatar
Posts: 6865
Joined: Mon Oct 08, 2012 6:41 pm
Location: Kyneton, Vic

Re: whipple 304 tune

Postby vlad01 » Sun Feb 14, 2021 3:32 pm

Sure.

OSE_$12PV112_2BAR - Petrol with VECalc.adx
(85.29 KiB) Downloaded 21 times
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.

Posts: 575
Joined: Sun Jun 06, 2010 9:59 am
Location: Perth

Re: whipple 304 tune

Postby Dazza92VP » Sun Feb 14, 2021 7:50 pm

thanks for that mate
this is the bin i pulled off the memcal the tuner did its kalmaker but im unsure of the xdf
Attachments
kalmaker 808.BIN
(64 KiB) Downloaded 26 times

Online
User avatar
Posts: 6865
Joined: Mon Oct 08, 2012 6:41 pm
Location: Kyneton, Vic

Re: whipple 304 tune

Postby vlad01 » Sun Feb 14, 2021 8:04 pm

Yeah I got no clue when it comes to kalmaker.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.

Site Admin
Online
User avatar
Posts: 6548
Joined: Sat Feb 28, 2009 8:34 pm

Re: whipple 304 tune

Postby antus » Sun Feb 14, 2021 8:41 pm

it says NDS05 at 9FF9 meaning its SP3 N05 with XDFs in the kalmaker section here viewtopic.php?f=7&t=5
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Posts: 575
Joined: Sun Jun 06, 2010 9:59 am
Location: Perth

Re: whipple 304 tune

Postby Dazza92VP » Sun Feb 14, 2021 8:57 pm

that seems to be the closest but is looks like the ve and spark maps are half of one map and half of another doesnt quite line up this would be the very latest of kalmaker OS used

Posts: 2669
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: whipple 304 tune

Postby VX L67 Getrag » Mon Feb 15, 2021 6:42 am

Here's the 3 ADX's I have from an old V110 version I have so 1, 2 & 3Bar.
Attachments
OSE $12p ADX's.zip
(19.51 KiB) Downloaded 19 times

Posts: 2669
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: whipple 304 tune

Postby VX L67 Getrag » Mon Feb 15, 2021 9:00 am

As far as the tune goes was the Kalmaker tune for that exact setup if so it may be easier copying those changes over to the $12p file.

Next

Return to Holden ALDL ECUs

Who is online

Users browsing this forum: No registered users and 7 guests