Looking for a starter map, Kalmaker to $12P

Mr DOHC · Post by **Mr DOHC** » Wed Mar 10, 2021 8:32 pm

Hey all,
i have a Kalmaker that i want to change to $12P. i am looking for a starter map to upload to get me started and i can road tune from.

VP Auto, 355, ported heads, YT roller rockers, H286 cam, pacemakers, stock intake, 14Point7 WB will be wired in soon.

I have the VR288 bin off viewtopic.php?f=7&t=375
Obviously that is a bit more wild than i need, but could that be used to get it going? Noting that its from a VR and i have a VP, or does that not matter for $12P?

VX L67 Getrag · Post by **VX L67 Getrag** » Thu Mar 11, 2021 6:50 am

It may be easier to copy the changes across in the kalmaker tune to the stock $12p file?

How well does it run on the kalmaker tune?

Mr DOHC · Post by **Mr DOHC** » Thu Mar 11, 2021 10:39 am

VX L67 Getrag wrote:It may be easier to copy the changes across in the kalmaker tune to the stock $12p file?

How well does it run on the kalmaker tune?

it ran fine with the old H276 cam, and it runs ok-ish with the new cam but you can tell it needs some love.

I had started to copy stuff off the old tune over but there are a lot of pages in the 12P that i couldn't find in old Kalmaker and i don't know if they're important or not?

VX L67 Getrag · Post by **VX L67 Getrag** » Thu Mar 11, 2021 10:55 am

If you want to share it here or PM I'm happy to have a look for you if you want.

Mr DOHC · Post by **Mr DOHC** » Thu Mar 11, 2021 12:48 pm

Attached is a very preliminary tune. Havent even tried to uploaded it to the ECU yet

OSE12P V112 - 1,2 and 3 bar.XDF
OSE_$12PV112_1bar - PETROL.ADX

VX L67 Getrag · Post by **VX L67 Getrag** » Thu Mar 11, 2021 12:57 pm

No I meant the kalmaker tune, to compare it & copy it across to $12... but at least with what you supplied I can see if there's anything to add once you upload the kalmaker file.

Mr DOHC · Post by **Mr DOHC** » Thu Mar 11, 2021 1:51 pm

ATTACHED

VX L67 Getrag · Post by **VX L67 Getrag** » Thu Mar 11, 2021 2:30 pm

Alright looks like it's based off BDJH.N03... now to get a working xdf to try & compare changes

Mr DOHC · Post by **Mr DOHC** » Thu Mar 11, 2021 2:41 pm

VX L67 Getrag wrote:Alright looks like it's based off BDJH.N03... now to get a working xdf to try & compare changes

you mean a working Kalmaker XDF, i have one if you need

VX L67 Getrag · Post by **VX L67 Getrag** » Thu Mar 11, 2021 2:45 pm

I downloaded the 1 here & looks like most of the changes after 0BA8 will be code changes with the bin file I have & most of the stuff before that is mainly defined, just a few bytes that aren't so I'll try & see if all you copied across looks right when I get some more spare time.

Looking for a starter map, Kalmaker to $12P

Looking for a starter map, Kalmaker to $12P

Re: Looking for a starter map, Kalmaker to $12P

Re: Looking for a starter map, Kalmaker to $12P

Re: Looking for a starter map, Kalmaker to $12P

Re: Looking for a starter map, Kalmaker to $12P

Re: Looking for a starter map, Kalmaker to $12P

Re: Looking for a starter map, Kalmaker to $12P

Re: Looking for a starter map, Kalmaker to $12P

Re: Looking for a starter map, Kalmaker to $12P

Re: Looking for a starter map, Kalmaker to $12P