So I uploaded a $12P to my Kalmaker, can it be fixed?
Re: So I uploaded a $12P to my Kalmaker, can it be fixed?
If you're getting this screen, you need to achieve all of those items listed
Re: So I uploaded a $12P to my Kalmaker, can it be fixed?
Com Port Setting, yes, COM4
Echo setting, tried both
Vehicle type is "Other" as i have a pre-VT
Physical connection, yes
Ignition on
PCM Hacking NVram, no, Kalmaker
Compatible code, yes
Echo setting, tried both
Vehicle type is "Other" as i have a pre-VT
Physical connection, yes
Ignition on
PCM Hacking NVram, no, Kalmaker
Compatible code, yes
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: So I uploaded a $12P to my Kalmaker, can it be fixed?
You need the ose plugin in your tunerpro plugin folder then you need to select the plugin in tunerpro and select the com port your ecu is on
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- vlad01
- Posts: 7795
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: So I uploaded a $12P to my Kalmaker, can it be fixed?
If the fans come on straight away that means corrupted NVRAM.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: So I uploaded a $12P to my Kalmaker, can it be fixed?
thats what happened when i loaded it incorrectly a week ago still happening now after QUUIPT4IT has updated to $12Pvlad01 wrote:If the fans come on straight away that means corrupted NVRAM.
Re: So I uploaded a $12P to my Kalmaker, can it be fixed?
thats all done, you did it for me via team viewer 2 years agodelcowizzid wrote:You need the ose plugin in your tunerpro plugin folder then you need to select the plugin in tunerpro and select the com port your ecu is on
- Attachments
-
- plugins.PNG (9.25 KiB) Viewed 2351 times
- vlad01
- Posts: 7795
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: So I uploaded a $12P to my Kalmaker, can it be fixed?
I would say it hasn't been programed correctly or its corrupt again. If it was indeed programed and verified good then it might be the internal battery that's dying/dead and losing the data.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: So I uploaded a $12P to my Kalmaker, can it be fixed?
Houston...
The chip blanked OK.
Written with zero offset.
Ended @ 7FFF. Everything looked good.
Without being able to do an 'in car' test, that's the only way to verify.
I'll post a shot later when I get to my desktop.
The chip blanked OK.
Written with zero offset.
Ended @ 7FFF. Everything looked good.
Without being able to do an 'in car' test, that's the only way to verify.
I'll post a shot later when I get to my desktop.
Re: So I uploaded a $12P to my Kalmaker, can it be fixed?
QUIPT4IT noticed the chip was sitting off center in the socket when I sent it. Any chance this chips position is wrong for what the TunerPro requires compared to the Kalmaker?
- Attachments
-
- 72217505-C657-4ECE-B30F-AA58F8BE90E5.jpeg (364.61 KiB) Viewed 2319 times
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: So I uploaded a $12P to my Kalmaker, can it be fixed?
Was it known to be working recently at any stage? I just noticed the nvram chip is a 0643 meaning the 43rd week of 2006 manufacture date. They have a non-replaceable battery and an advertised life of 10 years. That one is ~15 years. It probably didnt have enough power to hold the tune and lost it as soon as it left the programmer
For the kalmaker serial interface the echo option should be cleared. for all pcmhacking gear echo should be set.
For the kalmaker serial interface the echo option should be cleared. for all pcmhacking gear echo should be set.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396