Can this be used in my vp ss?

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Post Reply
chipb
Posts: 13
Joined: Sun Sep 17, 2017 7:25 am
cars: vp ss, cammed, 5speed, supercharged
ve ssv series 2 wagon, 6speed, 280rwkw
HDJ79R Landcruiser 1HD-FTE
Location: Korumurra Vic

Can this be used in my vp ss?

Post by chipb »

Hi all I was given a 16211838 ecu with a memcal that has a knock board on it along with a chip that has been butchered off it. The chip reads BWC9976

I already have a 808 and NVRAM with all the kit that I still have not used yet due to my ss still not ready to go.

Can I use the memcal along with the NVRAM to utilize the knock board, or can I take the knock board off and use it on my current memcal?
Attachments
20210721_204001.jpg
20210721_203942.jpg
User avatar
antus
Site Admin
Posts: 8238
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Can this be used in my vp ss?

Post by antus »

Yes, the 1F knock board is the correct knock filter to use for a v8. viewtopic.php?f=11&t=214&start=20#p13685
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Post Reply