Holden Commodore VY S/C

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Post Reply
NZchris
Posts: 2
Joined: Sun Jul 25, 2021 7:20 am
cars: VY S/C V6

Holden Commodore VY S/C

Post by NZchris »

Hi guys, was wondering if someone could help out with a 2 and 3 bar Map bin file along with XDF for tuner pro.
Got a mate with a VY V6 S/C that is going to become a dedicated drag car.
It currently has a prom with a W95 $07 VY V6 S/C 2 Bar Map, but i cant find a XDF file for that either.
Ive got tuner pro, eprom writing gear, UV eraser and chips ready to go.

Any help would be much appreciated, as want to have it easily editible before hand over to dyno guys, none of which here have any gear for this old stuff.
thanks.
immortality
Posts: 3416
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: Holden Commodore VY S/C

Post by immortality »

Are you after a L67 bin that has been modified to include a MAP sensor for boost pressure info or are you after a MAP based L67 tune using the original PCM?

If it is the latter than unfortunately I don't think it exists, one option may be to re-wire the car with an earlier 424 style PCM and run 11 or 12p which are MAP based tunes.
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Holden Commodore VY S/C

Post by delcowizzid »

W95 is kalmaker
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Holden Commodore VY S/C

Post by antus »

yep, kalmaker for that, or revert to maf and use the1s enhanced. bigger maf or card maf if required.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
NZchris
Posts: 2
Joined: Sun Jul 25, 2021 7:20 am
cars: VY S/C V6

Re: Holden Commodore VY S/C

Post by NZchris »

Ah,. OK.
Is there a XDF available at least for the bin that's in it?
If you use the normal VY SC $7 all the data appears wrong
0081
Posts: 186
Joined: Fri Jul 09, 2010 10:01 pm
cars: VY s L67
Haines Hunter - not a car but still a toy

Re: Holden Commodore VY S/C

Post by 0081 »

There is a few Kalmaker XDF's on this forum ( viewtopic.php?f=7&t=5) but not one for W95.

There is a fair amount of time and work that goes into creating one, there may be one around somewhere but it has not been made public on this forum if that's the case.
Even is there is one it may not be complete or tested 100%
Post Reply