8192 coms
8192 coms
My Vr ecm idle stepper control has died . i cannot find a VR/S manual ecu to replace it . i have boxes of 808's can you still get the fast ALDL boards to convert the 808?
Re: 8192 coms
According to chemistry, alcohol is a solution...
Re: 8192 coms
hey gareth , i tried messaging you , cant do it?? message me if you can
- vlad01
- Posts: 7801
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: 8192 coms
I am sure he means the SXR board not the USB comms.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: 8192 coms
The USB comms can provide an ALDL output, so can be used in place of the SXR boards. Instead of connecting the RX and TX lines, you'd connect the normally unused pin which is ALDL to the pad on the PCB which runs out to the ALDL pin on the back of the pcm. Its not commonly done, and you'd need to figure something for mounting (perhaps glue it to the main pcb) but it can be done.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396