Vs or vy ecu

[Commylife]

Hey guys I genuinely need some help to start tuning. I use tuner pro and am not to bad at navigating my way around it.
My question is I've built a turbo vs and am wondering the best way to go about it, I want to stay delco.. but do I rip the ecu and harness out and covert to vy ecu and harness?
Pros and cons ? Do I need a nvram for both?

[VX L67 Getrag]

if it's vy v6 n/a your talking about....definitely not thats a flash PCM & won't be easy!

[Commylife]

Can you tell me anything else?

[Dylan]

Even go the VT ECU, see what model has the most defined XDF in enhanced code and go with that. But I wouldn't go the flash ECU for boosted. If it wasn't the old Delco I'd go the LS1 ECU before anything else.

[Commylife]

What can you tell me about nvram and the vs ecu, I really am hoping to not muck around with to much its budget built. Just trying to achieve minimum with the delco I know it might not be the way to go but I need to know !

[delcowizzid]

Best would be vn or vp ecu if manual or vr auto ecu if electronic auto and use a 2 bar map sensor. 2nd best would be vs ecu with vs l67 based tune on the nvram

[Commylife]

Delco wizard! Been trying to figure our how tf I could talk to you! Is the vs l67 tune preety tuneable ?

[delcowizzid]

There is custom real-time code for vs l67 by the_1 in the custom code section to be used on an nvram or you can just program a memcal over and over with a chip burner.

[Commylife]

Im pretty sure I'm gonna go down the nvram path. I'm finding it difficult to get one though, can you help

[Gareth]

How are you finding it difficult?