VX/VU/VY N/A (Brown & Tan Plugs Only)
ECU Bench Harness
All You Need Is The Big Brown Plug (C&D). And Then The OBD/ALDL Plug From The Car.
Only 4 Wires Are Needed In The Large Brown ECU Plug.
*D16 - Orange Wire - 12v Ignition Switched
*D12 - Orange Wire - 12v Constant From Battery
*D6 - Black/Red Stripe – Batt Neg/Ground
*C13 – Red/Black Stripe ALDL Comms Cable To ALDL/OBD Port
Only 4 Wires Are Needed In The ALDL Plug.
*4 – Black – Batt Neg/Ground
*5 – Black/Yellow Stripe – Batt Neg/Ground
*9 – Red/Black Stripe - ALDL Comms Cable
*16 – Orange/Black Stripe – 12v+
Wiring:
Every Orange Wire To A 12V Source.
These Can Be Bunched Together.
Every Black Wire To Battery Negative.
These Can Be Bunched Together.
Red & Black Striped Cables Get Joint Together.
ECU Bench Wiring Harness To Flash Tunes VX VU VY N/A
Re: ECU Bench Wiring Harness To Flash Tunes VX VU VY N/A
Nice work.
I made a full spreadsheet some time ago to compair them all and show all the wiring for them if you have excel.
viewtopic.php?f=32&t=3641
I made a full spreadsheet some time ago to compair them all and show all the wiring for them if you have excel.
viewtopic.php?f=32&t=3641