1227165 to 1227808 (code 808)

[delcowizzid]

hows this progressing mate you up and running and logging data yet

[antus]

did you resolder the prom on the memcal? ive seen the heat go down the memcal pins and cause that, i would say its more likely a memcal problem. might be a bit cheaper to replace that (or get an nvram board..)

[antus]

Is this a '165 or a modded '808 at the moment, and with 12p? If so, then you dont need to short anything. But you probably will need to set oseplugin plugin to 'echo' mode.

[delcowizzid]

good to see shes up and roaring be carefull though the tune is just a quick throw together base tune to get up and running spark is pretty stock old chev hei spark curve

[VL400]

You will need to use TunerPro and an ALDL interface that is bi-directional 8192 baud capable. In the 12P zip file (https://pcmhacking.net/forums/viewtopic.php?f=27&t=356) there is an ADX to suit TunerPro for logging. I am not sure which pin has ALDL data on your vehicle data interface, it will be pin A8 of the ECU so might need to check wiring diagrams or trace the wire in your car.

[syntaxterror]

I am using $12p on a 7165 in a 3500 v6 fiero and had excellent results.

[VL400]

Provided you now have logging working in TunerPro using your ALDL interface then that NVRAM board is all that is required to get RT tuning added to the '165 ECU.

[antus]

No, I believe that one is designed/mapped differently. It uses a copy of the rom on a flash chip on the second header and maps the nvram in to unused memory space. then the montecarslow bin checksums the nvram tables on boot and copies from flash if they need refreshing.

[delcowizzid]

you could use the ostrich but you will loose some features.knock logging and VE learn at the least

[delcowizzid]

hows that base tune going you messed around with it at all