wondering if 12P will work with a 1228707 ecm
-
- Posts: 7
- Joined: Sun Jul 03, 2016 5:55 pm
- cars: 1985 Pontiac Fiero with 1990 2.3l dohc 16 valve (quad 4) engine, 5 speed manual
1978 Buick Regal with 455 Oldsmobile big block 4l80e trans, efi coming soon
wondering if 12P will work with a 1228707 ecm
Hello everyone
I'm new to efi tuning and am learning on an autoprom 1 and tunerpro rt. I have a 1985 pontiac fiero with a 1990 2.3l dohc out of a pontiac grand am. The ecm 1228707 $8B mask. I'm looking for a code/mask to run this thing with a supercharger, maybe super/turbo combination if I can some how wrap my mind around a turbo map and everything you need to know to match to engine.
Anyway was told by someone on gearheadefi to look into 12P, I may have a slim chance 12P would work with my 8707 ecm, would 12P working In a 8707 be a possibility? Wiring in a new ecm isn't that big of a deal but would like to avoid it....
Thanks for any info!!!!!!
I'm new to efi tuning and am learning on an autoprom 1 and tunerpro rt. I have a 1985 pontiac fiero with a 1990 2.3l dohc out of a pontiac grand am. The ecm 1228707 $8B mask. I'm looking for a code/mask to run this thing with a supercharger, maybe super/turbo combination if I can some how wrap my mind around a turbo map and everything you need to know to match to engine.
Anyway was told by someone on gearheadefi to look into 12P, I may have a slim chance 12P would work with my 8707 ecm, would 12P working In a 8707 be a possibility? Wiring in a new ecm isn't that big of a deal but would like to avoid it....
Thanks for any info!!!!!!
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: wondering if 12P will work with a 1228707 ecm
Probably not.... But can you post up a high res pic of the circuit board? We can see if it looks like it might be a compatible ecu that so far is not on our radar.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: wondering if 12P will work with a 1228707 ecm
Something to think about is the American 1227165 ECU. Same as our 1227808. It's compatible with 12P.
-
- Posts: 7
- Joined: Sun Jul 03, 2016 5:55 pm
- cars: 1985 Pontiac Fiero with 1990 2.3l dohc 16 valve (quad 4) engine, 5 speed manual
1978 Buick Regal with 455 Oldsmobile big block 4l80e trans, efi coming soon
Re: wondering if 12P will work with a 1228707 ecm
Ok I have a 165 from a 1988 pontiac trans am tpi motor. I will also get a pic of board and I have wiring diagrams I'll put up too. Mine uses low z injectors, 2.9 ohms give or take, I will have to change injectors for the 165 huh? Or is that what a resistor box is for??
Thank you I'll start digging around here.
Thank you I'll start digging around here.
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: wondering if 12P will work with a 1228707 ecm
Yes low z only supported for TPI or use a resistor box but then its hard to tune dead time for good idle as the factory injector dead time specs for the injectors will no longer be true. Depending what your aiming for big high impedance injectors with known dead time specs might be worth while.
We know the 165 is definately compatible, no need to post pics. Same as our vr manual computer and same as 808 with comms fitted.
We know the 165 is definately compatible, no need to post pics. Same as our vr manual computer and same as 808 with comms fitted.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 7
- Joined: Sun Jul 03, 2016 5:55 pm
- cars: 1985 Pontiac Fiero with 1990 2.3l dohc 16 valve (quad 4) engine, 5 speed manual
1978 Buick Regal with 455 Oldsmobile big block 4l80e trans, efi coming soon
Re: wondering if 12P will work with a 1228707 ecm
You don't want 707 pics?
I forgot to include that the engine I'm using does not have a distributer, there's a duel coil pack, CDI I think they call it. Will the 165 work with distributerless ignition?
And what is pcm for the VE? I tried to google it but couldn't pin point anything and read a tread here about using it.
I have no problem switching to best/user friendly pcm.
I forgot to include that the engine I'm using does not have a distributer, there's a duel coil pack, CDI I think they call it. Will the 165 work with distributerless ignition?
And what is pcm for the VE? I tried to google it but couldn't pin point anything and read a tread here about using it.
I have no problem switching to best/user friendly pcm.
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: wondering if 12P will work with a 1228707 ecm
707 would be interesting, 165 is a known thing.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: wondering if 12P will work with a 1228707 ecm
The 707 wont work with 12P. Do you have a wiring diagram for the current ECU and DIS?
-
- Posts: 7
- Joined: Sun Jul 03, 2016 5:55 pm
- cars: 1985 Pontiac Fiero with 1990 2.3l dohc 16 valve (quad 4) engine, 5 speed manual
1978 Buick Regal with 455 Oldsmobile big block 4l80e trans, efi coming soon
Re: wondering if 12P will work with a 1228707 ecm
Yes I have wiring for both. I will post a pic tomorrow if I can figure out how to post a pic.
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: wondering if 12P will work with a 1228707 ecm
post a reply -> upload attachment tab -> browse -> add the file. repeat for other attachments, add the reply text, submit.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396